4 open source boards using the XC6206P182MR-G

Real designs built with the XC6206P182MR-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The XC6206P182MR-G in open source designs

The gallery holds 4 open source boards using the XC6206P182MR-G from 3 GitHub repositories; a typical one measures about 80.6 × 54 mm and carries around 197 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Frank next by rh1tech.

Microcontrollers on boards using the XC6206P182MR-G

What boards using the XC6206P182MR-G are built for

XC6206P182MR-G: common questions

Where can I find a XC6206P182MR-G reference design?

Each of the 4 boards on this page is a real design using the XC6206P182MR-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the XC6206P182MR-G?

The 74HC4052BQ,115, AO3401A, APS6404L-3SQR-ZR, CH217K and CH334F appear in the most repositories here.

Which microcontrollers do boards using the XC6206P182MR-G use?

Most are built on RP2040/RP2350 (3).

How big is a typical board using the XC6206P182MR-G?

The median is 80.6 × 54 mm, and 0% are two-layer designs.

What is the most popular open source board using the XC6206P182MR-G?

By GitHub stars, Frank next by rh1tech, with 65 stars.

Can I simulate one of these boards using the XC6206P182MR-G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part