8 open source boards using the AP64501SP-13
Real designs built with the AP64501SP-13, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Oomwoo
makerspet
146.1 × 105.2 mm380 parts4LApache-2.042
Astra piNas
jlcjak
100 × 120 mm176 parts6LNo license28
Raspberry PiCM4IOv5-clone
sergiomd4
160 × 90 mm137 parts4LCC0-1.010
Raspberry PiUnifying
balthazar-space
120.9 × 78.8 mm121 parts4LCERN-OHL-S-2.07
Raspberry PiGranit
laenzlinger
92 × 99.5 mm102 parts4LCERN-OHL-P-2.02
ESP32Chainaxe
johnny9
100 × 70 mm109 parts4LCERN-OHL-S-2.01
ESP32AWS PROJECT
marydovika
206.3 × 91.3 mm207 parts2LNo license0
AVR/ArduinoFlySensei Stack RPi
denjos007
90 × 65 mm89 parts4LNo license0
The AP64501SP-13 in open source designs
The gallery holds 8 open source boards using the AP64501SP-13 from 8 GitHub repositories; a typical one measures about 110.5 × 90.6 mm and carries around 129 components.
88% use four copper layers or more, and 63% carry an open source license.
The most starred is Oomwoo pcb by makerspet.
Parts used alongside the AP64501SP-13
Microcontrollers on boards using the AP64501SP-13
What boards using the AP64501SP-13 are built for
AP64501SP-13: common questions
Where can I find a AP64501SP-13 reference design?
Each of the 8 boards on this page is a real design using the AP64501SP-13. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AP64501SP-13?
The RT9742GGJ5, USBLC6-2SC6, FSUSB42MUX, MagJack-A70-112-331N126 and RT9742SNGV appear in the most repositories here.
Which microcontrollers do boards using the AP64501SP-13 use?
Most are built on Raspberry Pi (3), ESP32 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the AP64501SP-13?
The median is 110.5 × 90.6 mm, and 13% are two-layer designs.
What is the most popular open source board using the AP64501SP-13?
By GitHub stars, Oomwoo pcb by makerspet, with 42 stars.
Can I simulate one of these boards using the AP64501SP-13 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.