15 open source boards using the C2843335
Real designs built with the C2843335, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350PicoROM-32 - ROM Emulator
wickerwaka
40.8 × 17.6 mm57 parts6LMIT332
RP2040/RP2350Upico
dotcypress
36 × 77 mm59 parts6LApache-2.0134
RP2040/RP2350Emberone00
256foundation
128 × 128 mm316 parts6LCERN-OHL-S-2.045
RP2040/RP2350Electronics
Project-Stinger
89.8 × 64 mm113 parts4LCustom license4
RP2040/RP2350HyprboardV2
FaizeenHoque
21 × 51 mm33 parts2LNo license3
RP2040/RP2350DevBoard-202
ThongNQ867
30 × 51 mm38 parts2LNo license1
RP2040/RP2350PicoCAN
AdrianR3
21 × 51.5 mm51 parts2LNo license0
RP2040/RP2350Cuttingboard
rudranshgoel1
21 × 51 mm39 parts2LNo license0
RP2040/RP2350MountPico
AaradhyaBarnwal
26.6 × 51 mm36 parts2LNo license0
RP2040/RP2350Red ducky
Xpandaru
16 × 40 mm30 parts2LNo license0
RP2040/RP2350PicoROM-28 - ROM Emulator
35.7 × 17.6 mm56 parts6LMIT332
RP2040/RP2350MicrocontrollerInputModule
corndog2000
31 × 111.4 mm337 parts2LCC-BY-NC-4.021
RP2040/RP2350Pi60 v1.1
1upkeyboards
285 × 94.6 mm238 parts2LCC-BY-NC-4.08
RP2040/RP2350PicoROM - ROM Emulator
42.2 × 17.8 mm53 parts6LMIT332
RP2040/RP2350Super16v3
76.2 × 81.6 mm100 parts2LCC-BY-NC-4.08
The C2843335 in open source designs
The gallery holds 15 open source boards using the C2843335 from 12 GitHub repositories; a typical one measures about 35.7 × 51 mm and carries around 56 components.
60% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is PicoROM-32 - ROM Emulator by wickerwaka.
Parts used alongside the C2843335
Microcontrollers on boards using the C2843335
What boards using the C2843335 are built for
C2843335: common questions
Where can I find a C2843335 reference design?
Each of the 15 boards on this page is a real design using the C2843335. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the C2843335?
The C2040, C39051, RP2040 and MCP1700x-330xxTT appear in the most repositories here.
Which microcontrollers do boards using the C2843335 use?
Most are built on RP2040/RP2350 (15).
How big is a typical board using the C2843335?
The median is 35.7 × 51 mm, and 60% are two-layer designs.
What is the most popular open source board using the C2843335?
By GitHub stars, PicoROM-32 - ROM Emulator by wickerwaka, with 332 stars.
Can I simulate one of these boards using the C2843335 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.