8 open source boards using the CP2102N-Axx-xQFN24
Real designs built with the CP2102N-Axx-xQFN24, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ChrisBox
TUDA-MUST
78 × 46.3 mm177 parts4LCC-BY-4.06
ESP32Lumenlab
ericmcdaniel
99.9 × 80 mm72 parts4LMIT3
ESP32Esp32-tiny led controller
t3mschm2d
33.5 × 33.5 mm25 parts4LNo license2
FPGANorthernStudios iCE40-UltraPlus-FPGA-Dev-Board
uzzambutt
27 × 55.5 mm62 parts4LMIT1
FPGANorthernStudios-FPGA-Dev-Board
27.2 × 64.8 mm42 parts6LMIT1
ESP32Esp32-bluetooth erm accel dongle faulty
manhoosbilli1
23.3 × 28.4 mm50 parts4LNo license0
ESP32Daronjli dongle
45.2 × 29.7 mm50 parts4LNo license0
ESP32Pcb cat toy
hari-ghatpande
65 × 66.9 mm43 parts2LNo license0
The CP2102N-Axx-xQFN24 in open source designs
The gallery holds 8 open source boards using the CP2102N-Axx-xQFN24 from 8 GitHub repositories; a typical one measures about 39.3 × 50.9 mm and carries around 50 components.
88% use four copper layers or more, and 50% carry an open source license.
The most starred is ChrisBox by TUDA-MUST.
Parts used alongside the CP2102N-Axx-xQFN24
What boards using the CP2102N-Axx-xQFN24 are built for
CP2102N-Axx-xQFN24: common questions
Where can I find a CP2102N-Axx-xQFN24 reference design?
Each of the 8 boards on this page is a real design using the CP2102N-Axx-xQFN24. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the CP2102N-Axx-xQFN24?
The AP2112K-3.3, ESP32-WROOM-32E, AP2112K-1.2, DRV2605LDGS and LIS3DH appear in the most repositories here.
Which microcontrollers do boards using the CP2102N-Axx-xQFN24 use?
Most are built on ESP32 (6) and FPGA (2).
How big is a typical board using the CP2102N-Axx-xQFN24?
The median is 39.3 × 50.9 mm, and 13% are two-layer designs.
What is the most popular open source board using the CP2102N-Axx-xQFN24?
By GitHub stars, ChrisBox by TUDA-MUST, with 6 stars.
Can I simulate one of these boards using the CP2102N-Axx-xQFN24 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.