11 open source boards using the ECS-1612MV-250-CN
Real designs built with the ECS-1612MV-250-CN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Reworkctf
azonenberg
54 × 50 mm125 parts4LBSD-3-Clause33
STM32Kup lulz
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Mainboard
165 × 121 mm617 parts10LBSD-3-Clause7- schematic only · 191 partsSTM32
Ayrton
191 partsBSD-3-Clause4 - schematic only · 80 partsSTM32
Grover
80 partsBSD-3-Clause2 
STM32Switch engine
151 × 111 mm362 parts10LBSD-3-Clause35
STM32Fpga stm32-ifaces
90 × 94.5 mm267 parts6LBSD-3-Clause17
STM32Lcbringup
93 × 69 mm198 parts4LBSD-3-Clause35
STM32Baset1-media converter
100.5 × 62.5 mm173 parts4LBSD-3-Clause17
FPGAFpga test kintex676-artix484
73 × 88 mm152 parts4LBSD-3-Clause17
Lpr rgmii phy
35 × 73.5 mm82 parts4LBSD-3-Clause17
The ECS-1612MV-250-CN in open source designs
The gallery holds 11 open source boards using the ECS-1612MV-250-CN from 6 GitHub repositories; a typical one measures about 93 × 88 mm and carries around 191 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Switch engine by azonenberg.
Parts used alongside the ECS-1612MV-250-CN
What boards using the ECS-1612MV-250-CN are built for
ECS-1612MV-250-CN: common questions
Where can I find a ECS-1612MV-250-CN reference design?
Each of the 11 boards on this page is a real design using the ECS-1612MV-250-CN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ECS-1612MV-250-CN?
The AT24MAC402, KSZ9031RN, STM32H735-UFBGA176-25, 74LVC1T45 and ADM3101E_QFN appear in the most repositories here.
Which microcontrollers do boards using the ECS-1612MV-250-CN use?
Most are built on STM32 (9) and FPGA (1).
How big is a typical board using the ECS-1612MV-250-CN?
The median is 93 × 88 mm, and 0% are two-layer designs.
What is the most popular open source board using the ECS-1612MV-250-CN?
By GitHub stars, Switch engine by azonenberg, with 35 stars.
Can I simulate one of these boards using the ECS-1612MV-250-CN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.