9 open source boards using the GT-USB-7010ASV
Real designs built with the GT-USB-7010ASV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32CloudSmoker
cwgstreet
70 × 70 mm56 parts4LMIT24
FABulous board
FPGA-Research
101.2 × 63.5 mm75 parts4LApache-2.06
GD32KiCad-GD32FxxxRx no-PHY
vanvught
77.2 × 59.7 mm48 parts2LMIT2
RP2040/RP2350Devboardrp2350
espcaa
59.2 × 26.4 mm43 parts4LNo license2
KiCad-GD32F207RG-Pixel-8
65.5 × 55 mm29 parts2LMIT2
ESP32Waypoint
M-Mrk
140 × 80 mm129 parts4LNo license0
RP2040/RP2350E-Ink-Badge
Acidicts
77.5 × 48.5 mm78 parts2LNo license0
ESP32Bike-Mini speedo
InfinityTech100
54 × 35 mm67 parts4LNo license0
RP2040/RP2350Devbackup
33.6 × 25.4 mm41 parts2LNo license2
The GT-USB-7010ASV in open source designs
The gallery holds 9 open source boards using the GT-USB-7010ASV from 8 GitHub repositories; a typical one measures about 70 × 55 mm and carries around 56 components.
56% use four copper layers or more, and 44% carry an open source license.
The most starred is CloudSmoker by cwgstreet.
Microcontrollers on boards using the GT-USB-7010ASV
What boards using the GT-USB-7010ASV are built for
GT-USB-7010ASV: common questions
Where can I find a GT-USB-7010ASV reference design?
Each of the 9 boards on this page is a real design using the GT-USB-7010ASV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the GT-USB-7010ASV use?
Most are built on ESP32 (3), RP2040/RP2350 (3) and GD32 (1).
How big is a typical board using the GT-USB-7010ASV?
The median is 70 × 55 mm, and 44% are two-layer designs.
What is the most popular open source board using the GT-USB-7010ASV?
By GitHub stars, CloudSmoker by cwgstreet, with 24 stars.
Can I simulate one of these boards using the GT-USB-7010ASV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.