5 open source boards using the LattePanda_Mu

Real designs built with the LattePanda_Mu, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filtersOpen license only|Most starred Recently updated Most components

The LattePanda_Mu in open source designs

The gallery holds 5 open source boards using the LattePanda_Mu from 4 GitHub repositories; a typical one measures about 170.1 × 102 mm and carries around 223 components.

80% use four copper layers or more, and 60% carry an open source license.

The most starred is Primer Carrier for LattePanda Mu by LattePandaTeam.

Parts used alongside the LattePanda_Mu

Microcontrollers on boards using the LattePanda_Mu

RP2040/RP2350 1

What boards using the LattePanda_Mu are built for

LattePanda_Mu: common questions

Where can I find a LattePanda_Mu reference design?

Each of the 5 boards on this page is a real design using the LattePanda_Mu. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LattePanda_Mu?

The ULC0524P, CH224K, RTL8111H-CG-RH, SY8253ADC and TL431DBZ appear in the most repositories here.

Which microcontrollers do boards using the LattePanda_Mu use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the LattePanda_Mu?

The median is 170.1 × 102 mm, and 20% are two-layer designs.

What is the most popular open source board using the LattePanda_Mu?

By GitHub stars, Primer Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.

Can I simulate one of these boards using the LattePanda_Mu before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.