15 open source boards using the MCP602
Real designs built with the MCP602, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Max2-audio dac
dilshan
101.8 × 52.5 mm153 parts2LMIT60
AVR/ArduinoOTTOtact
cester-ino
307 × 131.2 mm224 parts2LGPL-3.049
Zx sizif-512-ext
UzixLS
213 × 64 mm145 parts2LMIT19
AVR/ArduinoMycelium
microresearch
74.5 × 83.7 mm126 parts2LGPL-3.05
STM32Sensored-3-P-BLDC-Closed-Loop-V1
g-rahul
100 × 100 mm114 parts2LNo license5
AVR/ArduinoOTTOtact
307 × 131.2 mm224 parts2LGPL-3.02
Bord λ principial
Alex2269
53.3 × 71 mm62 parts2LNo license1
AVR/ArduinoMycleium pcb before thereminchange
74.5 × 83.7 mm126 parts2LGPL-3.05
STM32OTTO-main
239 × 80 mm100 parts2LGPL-3.02
Pwm2dc
20.3 × 17.8 mm22 parts2LNo license1
RP2040/RP2350Carte FX 0
PhysicsDptAngers
100 × 100 mm107 parts2LMIT87
Mycelium pcb radio
74.5 × 83.7 mm62 parts2LGPL-3.05
Heater shunt
23 × 17.2 mm17 parts2LNo license1
AND8bit
Tert2
100 × 100 mm61 parts2LNo license0
Small shunt
19.8 × 15.1 mm17 parts2LNo license1
The MCP602 in open source designs
The gallery holds 15 open source boards using the MCP602 from 9 GitHub repositories; a typical one measures about 100 × 83.7 mm and carries around 107 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Carte FX 0 by PhysicsDptAngers.
Parts used alongside the MCP602
Microcontrollers on boards using the MCP602
What boards using the MCP602 are built for
MCP602: common questions
Where can I find a MCP602 reference design?
Each of the 15 boards on this page is a real design using the MCP602. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP602?
The AMS1117-3.3, 74HC125, ATMEGA32U4-AU, FS312F-G and L7805 appear in the most repositories here.
Which microcontrollers do boards using the MCP602 use?
Most are built on AVR/Arduino (4), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the MCP602?
The median is 100 × 83.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP602?
By GitHub stars, Carte FX 0 by PhysicsDptAngers, with 87 stars.
Can I simulate one of these boards using the MCP602 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.