6 open source boards using the STM32F722RET6

Real designs built with the STM32F722RET6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

The STM32F722RET6 in open source designs

The gallery holds 6 open source boards using the STM32F722RET6 from 6 GitHub repositories; a typical one measures about 42.8 × 42.5 mm and carries around 115 components.

83% use four copper layers or more, and 50% carry an open source license.

The most starred is STM32F7 FC by rishikesh2715.

Microcontrollers on boards using the STM32F722RET6

STM32F722RET6: common questions

Where can I find a STM32F722RET6 reference design?

Each of the 6 boards on this page is a real design using the STM32F722RET6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32F722RET6?

The ICM-42688-P, AT7456E, BMP388, MP9943GQ-Z and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the STM32F722RET6 use?

Most are built on STM32 (5) and ESP32 (1).

How big is a typical board using the STM32F722RET6?

The median is 42.8 × 42.5 mm, and 17% are two-layer designs.

What is the most popular open source board using the STM32F722RET6?

By GitHub stars, STM32F7 FC by rishikesh2715, with 56 stars.

Can I simulate one of these boards using the STM32F722RET6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part