8 open source boards using the SY6280AAC(SOT23-5)
Real designs built with the SY6280AAC(SOT23-5), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ESP-EVB
OLIMEX
33 × 48.3 mm123 parts2LApache-2.051
S3-OLinuXino
62 × 50 mm217 parts4LGPL-3.041
STM32STMP1-OLinuXino
84 × 59.6 mm387 parts8LGPL-3.013
IMX8MP-SOM-EVB
154.6 × 101.8 mm317 parts4LGPL-3.08
RK3328-SOM-EBV
99.1 × 78.7 mm128 parts4LGPL-3.08
NXPRT1010Py
25.4 × 53.3 mm76 parts4LGPL-3.06
STMP1-A13-EVB
90 × 70 mm138 parts4LGPL-3.03
ESP32ESP-PRO
33 × 48.3 mm122 parts2LApache-2.051
The SY6280AAC(SOT23-5) in open source designs
The gallery holds 8 open source boards using the SY6280AAC(SOT23-5) from 7 GitHub repositories; a typical one measures about 73 × 56.5 mm and carries around 133 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is ESP-EVB by OLIMEX.
Parts used alongside the SY6280AAC(SOT23-5)
What boards using the SY6280AAC(SOT23-5) are built for
SY6280AAC(SOT23-5): common questions
Where can I find a SY6280AAC(SOT23-5) reference design?
Each of the 8 boards on this page is a real design using the SY6280AAC(SOT23-5). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SY6280AAC(SOT23-5)?
The SY8089AAAC(SOT23-5), NA(RCLAMP0524P(SLP2510P8)), KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)), MT3608(SOT23-6) and NA(ESD5304D-10/TR) appear in the most repositories here.
Which microcontrollers do boards using the SY6280AAC(SOT23-5) use?
Most are built on ESP32 (2), NXP (1) and STM32 (1).
How big is a typical board using the SY6280AAC(SOT23-5)?
The median is 73 × 56.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the SY6280AAC(SOT23-5)?
By GitHub stars, ESP-EVB by OLIMEX, with 51 stars.
Can I simulate one of these boards using the SY6280AAC(SOT23-5) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.