12 open source boards using the 24AA02-OT
Real designs built with the 24AA02-OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Encoder interpolator
matthewSorensen
78 × 46 mm63 parts4LCERN-OHL-S-2.01PIC
GPSDO
dewayne57
203.2 × 152.4 mm157 parts2LApache-2.00AVR/Arduino
Rasle
tbowmo
65 × 56 mm70 parts2LNo license0STM32
Spha btnn hardware
sillevl
37.6 × 37.6 mm68 parts4LNo license0ESP32
OSMC Receiver Translators
Koalaven
120.1 × 78.2 mm65 parts4LNo license0STM32
Spha btnu hardware
sillevl
29 × 29 mm47 parts4LNo license0Main v2
etet100
79.4 × 53.3 mm26 parts2LNo license0RP2040/RP2350
Inwall relay esp32
slaesh
32 × 10.3 mm19 parts4LGPL-3.011ESP32
OSMC Receiver V1.2
Koalaven
120.7 × 78.7 mm65 parts4LNo license0Main nodemcu
etet100
51.4 × 66.7 mm16 parts2LNo license0IN12 Carrier Board
drewsum
200 × 50 mm195 parts4LNo license0ESP32
Modules
Koalaven
34 × 41 mm48 parts2LNo license0
How designs wire the 24AA02-OT
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 24AA02-OT connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF.
- The SCL pin has a pull-up to 3.3V on 5 of 9 designs, most often 10 kΩ (then 4.7 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 9 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: The microcontroller 56%, a connector 33%, TLC59108xPW 22% |
|
| VSSpin 2 | Connected to: GND 91% | — |
| SDApin 3 | Connected to: The microcontroller 56%, a connector 33%, TLC59108xPW 22% |
|
| VCCpin 4 | Connected to: 3.3V 78% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Inwall relay esp32 by slaesh, Encoder interpolator by matthewSorensen, GPSDO by dewayne57 and IN12 Carrier Board by drewsum.
The 24AA02-OT in open source designs
The gallery holds 12 open source boards using the 24AA02-OT from 9 GitHub repositories; a typical one measures about 71.5 × 51.7 mm and carries around 64 components.
58% use four copper layers or more, and 25% carry an open source license.
The most starred is Inwall relay esp32 by slaesh.
Parts used alongside the 24AA02-OT
Microcontrollers on boards using the 24AA02-OT
What boards using the 24AA02-OT are built for
24AA02-OT: common questions
Where can I find a 24AA02-OT reference design?
Each of the 12 boards on this page is a real design using the 24AA02-OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 24AA02-OT VCC pin?
The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the 24AA02-OT.
What pull-up resistor is used on the 24AA02-OT SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 9 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 9 open source designs using the 24AA02-OT.
What pull-up resistor is used on the 24AA02-OT SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 9 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 9 open source designs using the 24AA02-OT.
What parts are used alongside the 24AA02-OT?
The MCP1700-3302E_SOT23, PESD2CAN, SN65HVD230, STM32L432KCUx and TLC59108xPW appear in the most repositories here.
Which microcontrollers do boards using the 24AA02-OT use?
Most are built on ESP32 (3), STM32 (2), AVR/Arduino (1) and PIC (1).
How big is a typical board using the 24AA02-OT?
The median is 71.5 × 51.7 mm, and 42% are two-layer designs.
What is the most popular open source board using the 24AA02-OT?
By GitHub stars, Inwall relay esp32 by slaesh, with 11 stars.
Can I simulate one of these boards using the 24AA02-OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.