11 open source boards using the 6264
Real designs built with the 6264, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LanguageCard
btb
100 × 77.5 mm37 parts2LApache-2.044Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24- schematic only · 32 parts
Digicard-D-Net
markadev
32 parts2LNo license23 AVR/Arduino
VC4000MultiROM
mkeller0815
160 × 100 mm55 parts2LMIT11C128dcr-DolphinDOS3
ytmytm
97.8 × 84.5 mm31 parts2LNo license7FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02Zak180
agkaminski
188 × 128.3 mm128 parts4LCC-BY-NC-4.00Z80-Calculator
BrandonMitchell1920
199.4 × 125.7 mm86 parts2LNo license0Q2a
joewing
154 × 160 mm154 parts2LNo license41Matra Alice Internal 8KB RAM Expansion
BrettHallen
32.5 × 38.1 mm4 parts2LNo license4AVR/Arduino
Vga
agkaminski
129.5 × 74.2 mm36 parts2LNo license1
How designs wire the 6264
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 6264 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF.
- The CE2 pin is tied to VCC on 7 of 10 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 100% | — |
| CE2pin 26 | Connected to: VCC 70% · a signal 30% | — |
| VCCpin 28 | Connected to: VCC 100% |
|
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LanguageCard by btb, Q2a by joewing, Plusd by alvaroalea and VC4000MultiROM by mkeller0815.
The 6264 in open source designs
The gallery holds 11 open source boards using the 6264 from 11 GitHub repositories; a typical one measures about 141.8 × 97.8 mm and carries around 55 components.
91% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is LanguageCard by btb.
Parts used alongside the 6264
Microcontrollers on boards using the 6264
What boards using the 6264 are built for
6264: common questions
Where can I find a 6264 reference design?
Each of the 11 boards on this page is a real design using the 6264. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 6264 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the 6264.
How is the 6264 CE2 pin connected?
The CE2 pin is tied to VCC on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the 6264.
What parts are used alongside the 6264?
The 2764, 74HC245, 74HC00, 74HC02 and 74HC166 appear in the most repositories here.
Which microcontrollers do boards using the 6264 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 6264?
The median is 141.8 × 97.8 mm, and 91% are two-layer designs.
What is the most popular open source board using the 6264?
By GitHub stars, LanguageCard by btb, with 44 stars.
Can I simulate one of these boards using the 6264 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.