8 open source boards using the 27256
Real designs built with the 27256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
MSX SD
yanataka60
79 × 100 mm13 parts2LMIT19C128dcr-DolphinDOS3
ytmytm
97.8 × 84.5 mm31 parts2LNo license7CP297s
Danjovic
155.1 × 156 mm127 parts2LGPL-3.04FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 ROM SOCKET
yanataka60
78 × 24 mm4 parts2LMIT7Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1Cart
agkaminski
47.2 × 29.2 mm4 parts2LCC0-1.02
How designs wire the 27256
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 27256 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VPPpin 1 | Connected to: 5V 83% · a signal 17% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| VCCpin 28 | Connected to: 5V 100% |
|
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MSX SD by yanataka60, ROM SOCKET by yanataka60, C128dcr-DolphinDOS3 by ytmytm and CP297s by Danjovic.
The 27256 in open source designs
The gallery holds 8 open source boards using the 27256 from 7 GitHub repositories; a typical one measures about 97.8 × 96.5 mm and carries around 69 components.
86% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is MSX SD by yanataka60.
Parts used alongside the 27256
Microcontrollers on boards using the 27256
What boards using the 27256 are built for
27256: common questions
Where can I find a 27256 reference design?
Each of the 8 boards on this page is a real design using the 27256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 27256 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 27256.
What parts are used alongside the 27256?
The 74LS138, 74LS245, 6264, 74LS04 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 27256 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 27256?
The median is 97.8 × 96.5 mm, and 86% are two-layer designs.
What is the most popular open source board using the 27256?
By GitHub stars, MSX SD by yanataka60, with 19 stars.
Can I simulate one of these boards using the 27256 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.