7 open source boards using the 68681

Real designs built with the 68681, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 68681

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 68681 connects to, and the resistors, capacitors and other passives placed on it.

  • The IRQ pin has a pull-up to VCC on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
  • The X1/CLK pin has a capacitor to GND on 5 of 6 designs, most often 15 pF (then 5 pF).
  • The X2 pin has a capacitor to GND on 5 of 6 designs, most often 5 pF (then 10 pF).
  • The RESET pin has a pull-up to VCC on 5 of 6 designs, most often 4.7 kΩ (then 10 kΩ).
DTACKpin 9Connected to: A connector 50%, GAL16V8 33% · not connected 17%
  • Pull-up to 5V on 50% · 10 kΩ (1), 4.7 kΩ (1), 1 kΩ (1)
GNDpin 20Connected to: GND 100%
IRQpin 21Connected to: 74LS148 33%
  • Pull-up to VCC on 83% · 10 kΩ (2), 4.7 kΩ (2), 1 kΩ (1)
X1/CLKpin 32Connected to: Signal 100%
  • Capacitor to GND on 83% · 15 pF (2), 5 pF (2), 7 pF (1)
  • Crystal on 50% · 3.6864 MHz (2)
X2pin 33Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 83% · 5 pF (2), 10 pF (1), 15 pF (1)
  • Crystal on 50% · 3.6864 MHz (2)
RESETpin 34Connected to: 74LS05 33%, a connector 33%, GAL16V8 33%
  • Pull-up to VCC on 83% · 4.7 kΩ (2), 10 kΩ (1), 100 kΩ (1)
VCCpin 40Connected to: VCC 100%
  • Decoupling capacitor on 33% · 100 nF (2)

33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 68k-SBC by transistorfet, Yddraig by ddraig68k, 6809v2 by jbevren and Mini68k by seventhoctave.

The 68681 in open source designs

The gallery holds 7 open source boards using the 68681 from 6 GitHub repositories; a typical one measures about 154.9 × 139.7 mm and carries around 72 components.

71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is 68k-SBC by transistorfet.

What boards using the 68681 are built for

68681: common questions

Where can I find a 68681 reference design?

Each of the 7 boards on this page is a real design using the 68681. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the 68681 IRQ pin?

The IRQ pin has a pull-up to VCC on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the 68681.

How is the 68681 X1/CLK pin connected?

The X1/CLK pin has a capacitor to GND on 5 of 6 designs, most often 15 pF (then 5 pF). Counted from the KiCad layouts of 6 open source designs using the 68681.

How is the 68681 X2 pin connected?

The X2 pin has a capacitor to GND on 5 of 6 designs, most often 5 pF (then 10 pF). Counted from the KiCad layouts of 6 open source designs using the 68681.

What parts are used alongside the 68681?

The 74LS05, 74LS32, 74LS148, 74LS245 and AS6C4008-55PCN appear in the most repositories here.

How big is a typical board using the 68681?

The median is 154.9 × 139.7 mm, and 71% are two-layer designs.

What is the most popular open source board using the 68681?

By GitHub stars, 68k-SBC by transistorfet, with 69 stars.

Can I simulate one of these boards using the 68681 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part