10 open source boards using the 7404
Real designs built with the 7404, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
.C68
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051486 Board
FoxCutter
233.4 × 100 mm114 parts4LBSD-3-Clause44GSE14
stonedDiscord
163 × 249 mm102 parts2LBSD-2-Clause5Prometheus-VLB
computerguy096
240.5 × 69.4 mm74 parts4LGPL-3.03Mainboard
btb
414.3 × 266.7 mm155 parts2LNo license0Frequency-Meter
rakshit9695
88 × 94.5 mm28 parts2LNo license0PIC
Copy
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051Peri
felge1966
47 × 50.8 mm7 parts2LUnlicense0GIMIX DMA Floppy
roberto314
248.9 × 139.7 mm124 parts2LBSD-2-Clause1GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1
How designs wire the 7404
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 7404 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 8 is left unconnected on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Not connected 63% · a signal 38% | — |
| VCCpin 14 | Connected to: VCC 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include .C68 by ProbablyNotArtyom, 486 Board by FoxCutter, GSE14 by stonedDiscord and Prometheus-VLB by computerguy096.
The 7404 in open source designs
The gallery holds 10 open source boards using the 7404 from 8 GitHub repositories; a typical one measures about 214 × 139.7 mm and carries around 108 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is .C68 by ProbablyNotArtyom.
Microcontrollers on boards using the 7404
What boards using the 7404 are built for
7404: common questions
Where can I find a 7404 reference design?
Each of the 10 boards on this page is a real design using the 7404. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 7404 pin 8 connected?
Pin 8 is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the 7404.
What parts are used alongside the 7404?
The 7408, 6116, 7400, 7420 and 74LS123 appear in the most repositories here.
Which microcontrollers do boards using the 7404 use?
Most are built on PIC (2).
How big is a typical board using the 7404?
The median is 214 × 139.7 mm, and 60% are two-layer designs.
What is the most popular open source board using the 7404?
By GitHub stars, .C68 by ProbablyNotArtyom, with 51 stars.
Can I simulate one of these boards using the 7404 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.