12 open source boards using the 74HC30

Real designs built with the 74HC30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the 74HC30

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74HC30 connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_9 pin is left unconnected on 11 of 11 designs.
  • The NC_10 pin is left unconnected on 11 of 11 designs.
  • The NC_13 pin is left unconnected on 11 of 11 designs.
  • The VCC pin has a decoupling capacitor on 8 of 11 designs, most often 100 nF.
GNDpin 7Connected to: GND 100%
NC_9pin 9Connected to: Not connected 100%
NC_10pin 10Connected to: Not connected 100%
NC_13pin 13Connected to: Not connected 100%
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 73% · 100 nF (7)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SB-mini-II by simonboak, 6502 RAM Card by acwright, K30p-VME by transistorfet and 6502 ACE Board by acwright.

The 74HC30 in open source designs

The gallery holds 12 open source boards using the 74HC30 from 11 GitHub repositories; a typical one measures about 149.2 × 99.5 mm and carries around 99 components.

67% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is SB-mini-II by simonboak.

Microcontrollers on boards using the 74HC30

74HC30: common questions

Where can I find a 74HC30 reference design?

Each of the 12 boards on this page is a real design using the 74HC30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC30 NC_9 pin connected?

The NC_9 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the 74HC30.

How is the 74HC30 NC_10 pin connected?

The NC_10 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the 74HC30.

How is the 74HC30 NC_13 pin connected?

The NC_13 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the 74HC30.

What parts are used alongside the 74HC30?

The 74HC00, 74HC138, 65C02, 74HC02 and 74HC21 appear in the most repositories here.

Which microcontrollers do boards using the 74HC30 use?

Most are built on AVR/Arduino (3) and RP2040/RP2350 (2).

How big is a typical board using the 74HC30?

The median is 149.2 × 99.5 mm, and 67% are two-layer designs.

What is the most popular open source board using the 74HC30?

By GitHub stars, SB-mini-II by simonboak, with 74 stars.

Can I simulate one of these boards using the 74HC30 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part