6 open source boards using the 74LS51
Real designs built with the 74LS51, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17Intellivision t card
abzman
143 × 174.7 mm75 parts2LUnlicense12Main
ceteras
299.2 × 180 mm352 parts2LMIT11Main
ceteras
299.2 × 180 mm434 parts2LMIT5BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT2
How designs wire the 74LS51
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LS51 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: VCC 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CGA Redux by hkzlab, Microdigital - TK 2000 by clemarfolly, Intellivision t card by abzman and Main by ceteras.
The 74LS51 in open source designs
The gallery holds 6 open source boards using the 74LS51 from 6 GitHub repositories; a typical one measures about 299.2 × 172.3 mm and carries around 229 components.
83% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is CGA Redux by hkzlab.
Parts used alongside the 74LS51
What boards using the 74LS51 are built for
74LS51: common questions
Where can I find a 74LS51 reference design?
Each of the 6 boards on this page is a real design using the 74LS51. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74LS51?
The 74LS04, 74LS08, 74LS00, 74LS86 and 74LS74 appear in the most repositories here.
How big is a typical board using the 74LS51?
The median is 299.2 × 172.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the 74LS51?
By GitHub stars, CGA Redux by hkzlab, with 56 stars.
Can I simulate one of these boards using the 74LS51 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.