6 open source boards using the 74LS42

Real designs built with the 74LS42, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LS42

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LS42 connects to, and the resistors, capacitors and other passives placed on it.

  • The 8 pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The 9 pin is left unconnected on 4 of 6 designs (a signal on 2).
6pin 7Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 680 Ω (1), 33 Ω (1)
GNDpin 8Connected to: GND 100%
7pin 9Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 680 Ω (1), 33 Ω (1)
8pin 10Connected to: Not connected 67% · a signal 33%
9pin 11Connected to: Not connected 67% · a signal 33%
VCCpin 16Connected to: 5V 100%
  • Decoupling capacitor on 33% · 100 nF (2)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Leaky bucket by tpcarlson, Intellivision t card by abzman, Main by ceteras and Main by ceteras.

The 74LS42 in open source designs

The gallery holds 6 open source boards using the 74LS42 from 6 GitHub repositories; a typical one measures about 221.1 × 151.6 mm and carries around 157 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Leaky bucket by tpcarlson.

Microcontrollers on boards using the 74LS42

74LS42: common questions

Where can I find a 74LS42 reference design?

Each of the 6 boards on this page is a real design using the 74LS42. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LS42 8 pin connected?

The 8 pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LS42.

How is the 74LS42 9 pin connected?

The 9 pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LS42.

What parts are used alongside the 74LS42?

The 74LS00, 74LS04, 74LS08, 74LS51 and 74LS74 appear in the most repositories here.

Which microcontrollers do boards using the 74LS42 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74LS42?

The median is 221.1 × 151.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS42?

By GitHub stars, Leaky bucket by tpcarlson, with 106 stars.

Can I simulate one of these boards using the 74LS42 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part