6 open source boards using the 74LS682

Real designs built with the 74LS682, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LS682

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LS682 connects to, and the resistors, capacitors and other passives placed on it.

  • The P>Q pin is left unconnected on 4 of 6 designs (a signal on 2).
P>Qpin 1Connected to: Not connected 67% · a signal 33%
GNDpin 10Connected to: GND 100%
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 33% · 100 nF (2)

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Coco9511pak by barberd, Vectron handheld by nickbild, Cocousbhost by barberd and 6809PC by danwerner21.

The 74LS682 in open source designs

The gallery holds 6 open source boards using the 74LS682 from 6 GitHub repositories; a typical one measures about 173.3 × 164 mm and carries around 43 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Coco9511pak by barberd.

What boards using the 74LS682 are built for

74LS682: common questions

Where can I find a 74LS682 reference design?

Each of the 6 boards on this page is a real design using the 74LS682. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LS682 P>Q pin connected?

The P>Q pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LS682.

What parts are used alongside the 74LS682?

The 74LS04, 74LS32, 74LS74, 74LS00 and 74LS08 appear in the most repositories here.

How big is a typical board using the 74LS682?

The median is 173.3 × 164 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS682?

By GitHub stars, Coco9511pak by barberd, with 12 stars.

Can I simulate one of these boards using the 74LS682 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part