10 open source boards using the 8259A
Real designs built with the 8259A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DubaiXTClone
spencer-uk
304.8 × 215.9 mm144 parts4LCERN-OHL-W-2.08Mad5160
madcatse
304.8 × 215.9 mm188 parts4LMIT5Intel 8088 Computer
oberrow
100 × 100 mm64 parts4LMIT1- schematic only · 69 parts
Yaufp8088
fifteenhex
69 partsGPL-3.01 8088-MicroATX-Computer
CPTforever
244 × 244 mm184 parts6LNo license0SBC 8080 ECB
sladek
160.5 × 100.2 mm111 parts2LNo license0My pcxt
ppsilv
258.4 × 104.1 mm85 parts2LNo license0PIC
Tralala8088homebrew
ppsilv
258.4 × 104.1 mm85 parts2LNo license0PIC
S10 PIC SPI v1
CatspersCoffee
254 × 134.1 mm163 partsCustom license0ExpansionBoard
MicroLind-Developers
170.2 × 170.2 mm43 parts4LCERN-OHL-P-2.00
How designs wire the 8259A
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 8259A connects to, and the resistors, capacitors and other passives placed on it.
- The CAS0 pin is left unconnected on 8 of 8 designs.
- The CAS1 pin is left unconnected on 8 of 8 designs.
- The CAS2 pin is left unconnected on 8 of 8 designs.
- The SP/EN pin has a pull-up to 5V on 5 of 8 designs, most often 4.7 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CAS0pin 12 | Connected to: Not connected 100% | — |
| CAS1pin 13 | Connected to: Not connected 100% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| CAS2pin 15 | Connected to: Not connected 100% | — |
| SP/ENpin 16 | Connected to: Signal 75% · VCC 25% |
|
| VCCpin 28 | Connected to: 5V 100% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DubaiXTClone by spencer-uk, Mad5160 by madcatse, Intel 8088 Computer by oberrow and S10 PIC SPI v1 by CatspersCoffee.
The 8259A in open source designs
The gallery holds 10 open source boards using the 8259A from 9 GitHub repositories; a typical one measures about 254 × 134.1 mm and carries around 98 components.
63% use four copper layers or more, and 50% carry an open source license.
The most starred is DubaiXTClone by spencer-uk.
Parts used alongside the 8259A
Microcontrollers on boards using the 8259A
What boards using the 8259A are built for
8259A: common questions
Where can I find a 8259A reference design?
Each of the 10 boards on this page is a real design using the 8259A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 8259A CAS0 pin connected?
The CAS0 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 8259A.
How is the 8259A CAS1 pin connected?
The CAS1 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 8259A.
How is the 8259A CAS2 pin connected?
The CAS2 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 8259A.
What parts are used alongside the 8259A?
The 8288, 74LS04, 74LS244, 74LS245 and 8087 appear in the most repositories here.
Which microcontrollers do boards using the 8259A use?
Most are built on PIC (2).
How big is a typical board using the 8259A?
The median is 254 × 134.1 mm, and 38% are two-layer designs.
What is the most popular open source board using the 8259A?
By GitHub stars, DubaiXTClone by spencer-uk, with 8 stars.
Can I simulate one of these boards using the 8259A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.