7 open source boards using the 82C55

Real designs built with the 82C55, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 82C55

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 82C55 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 7 is tied to GND on 6 of 6 designs.
  • Pin 26 is tied to VCC on 5 of 5 designs.
  • Pin 10 has a series capacitor on 3 of 6 designs, most often 10 µF.
  • Pin 12 has a series capacitor on 3 of 6 designs, most often 1 µF.
Pin 7Connected to: GND 100%
Pin 10Connected to: Signal 100%
  • Series capacitor on 50% · 10 µF (3)
Pin 12Connected to: Signal 100%
  • Series capacitor on 50% · 1 µF (3)
Pin 13Connected to: A connector 33%
  • Series resistor on 50% · 1 kΩ (3)
Pin 26Connected to: VCC 100%

35 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Keyboard by merlinkv, Minimax8085-apu ext by skiselev and Omega-Mainboard by msx-solis.

The 82C55 in open source designs

The gallery holds 7 open source boards using the 82C55 from 6 GitHub repositories; a typical one measures about 333.4 × 149.9 mm and carries around 248 components.

86% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.

The most starred is Omega-Mainboard by skiselev.

What boards using the 82C55 are built for

82C55: common questions

Where can I find a 82C55 reference design?

Each of the 7 boards on this page is a real design using the 82C55. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 82C55 pin 7 connected?

Pin 7 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 82C55.

How is the 82C55 pin 26 connected?

Pin 26 is tied to VCC on 5 of 5 designs. Counted from the KiCad layouts of 6 open source designs using the 82C55.

How is the 82C55 pin 10 connected?

Pin 10 has a series capacitor on 3 of 6 designs, most often 10 µF. Counted from the KiCad layouts of 6 open source designs using the 82C55.

What parts are used alongside the 82C55?

The 74HCT157, 74HCT74, 74AHCT125, 74AHCT138 and 74AHCT32 appear in the most repositories here.

How big is a typical board using the 82C55?

The median is 333.4 × 149.9 mm, and 86% are two-layer designs.

What is the most popular open source board using the 82C55?

By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.

Can I simulate one of these boards using the 82C55 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part