21 open source boards using the 82C55A
Real designs built with the 82C55A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Apple2Card
profdc9
160 × 78.2 mm77 parts2LNo license95AVR/Arduino
ISACard
profdc9
189.7 × 95.9 mm99 parts2LCC-BY-SA-4.046- schematic only · 56 parts
Intel8088OnBreadboard
sladorsoft
56 partsNo license41 MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028Msxdos2s
b3rendsh
99.8 × 64.1 mm35 parts2LCC-BY-NC-4.024Civil25
raleighslack
137.2 × 137.2 mm40 parts2LApache-2.06Z180-comp
89Mods
99.3 × 88.7 mm63 parts4LMIT3JFF
herraa1
250 × 150 mm132 parts2LGPL-3.02Amstrad-CPC-8255-PIO
rabs664
88.9 × 88.9 mm14 parts2LGPL-3.02Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00My pcxt
ppsilv
258.4 × 104.1 mm85 parts2LNo license0Z-FIGHTER Mainboard
tangent3D
100 × 150 mm43 parts2LMIT10Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1PIC
Tralala8088homebrew
ppsilv
258.4 × 104.1 mm85 parts2LNo license0Z80 Simple Computer
apws
160 × 100 mm33 parts4LNo license0MemoryAndPeripherals
daveho
150 × 90 mm28 partsNo license1982C55 GPIO Unit
oberrow
52 × 72 mm11 parts4LMIT1RC2014 82c55 PPIDE V2.1
dennisperry
104 × 39 mm17 parts2LNo license0MECB IDE
epaell
99.8 × 99.8 mm16 parts2LNo license6Parallell-Expansion
MicroLind-Developers
85.1 × 70.1 mm13 parts2LCERN-OHL-P-2.00
How designs wire the 82C55A
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the 82C55A connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 18 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 26 | Connected to: 5V 100% |
|
38 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Apple2Card by profdc9, ISACard by profdc9, MSX ONE by jdgabbard and Msxdos2s by b3rendsh.
The 82C55A in open source designs
The gallery holds 21 open source boards using the 82C55A from 19 GitHub repositories; a typical one measures about 155 × 99.9 mm and carries around 56 components.
74% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is Apple2Card by profdc9.
Parts used alongside the 82C55A
Microcontrollers on boards using the 82C55A
What boards using the 82C55A are built for
82C55A: common questions
Where can I find a 82C55A reference design?
Each of the 21 boards on this page is a real design using the 82C55A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 82C55A VCC pin?
The VCC pin has a decoupling capacitor on 8 of 18 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the 82C55A.
What parts are used alongside the 82C55A?
The 74HCT32, 28C256, 74HCT00, 74HCT138 and 74HCT04 appear in the most repositories here.
Which microcontrollers do boards using the 82C55A use?
Most are built on AVR/Arduino (2) and PIC (1).
How big is a typical board using the 82C55A?
The median is 155 × 99.9 mm, and 74% are two-layer designs.
What is the most popular open source board using the 82C55A?
By GitHub stars, Apple2Card by profdc9, with 95 stars.
Can I simulate one of these boards using the 82C55A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.