10 open source boards using the Arduino_Pro_Mini_5V

Real designs built with the Arduino_Pro_Mini_5V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the Arduino_Pro_Mini_5V

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the Arduino_Pro_Mini_5V connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is left unconnected on 9 of 9 designs.
  • Pin 2 is left unconnected on 9 of 9 designs.
  • Pin 4 is left unconnected on 9 of 9 designs.
  • Pin 21 is tied to 5V on 9 of 9 designs.
Pin 1Connected to: Not connected 100%
Pin 2Connected to: Not connected 100%
Pin 4Connected to: Not connected 100%
Pin 21Connected to: 5V 100%
Pin 22Connected to: Not connected 100%
Pin 23Connected to: GND 100%
Pin 24Connected to: Not connected 100%
Pin A6Connected to: Not connected 100%
Pin A7Connected to: Not connected 100%

19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PC-8001 SD by yanataka60, MZ80K SD by yanataka60, MSX SD by yanataka60 and Mz-2000 by yanataka60.

The Arduino_Pro_Mini_5V in open source designs

The gallery holds 10 open source boards using the Arduino_Pro_Mini_5V from 9 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 20 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is PC-8001 SD by yanataka60.

Parts used alongside the Arduino_Pro_Mini_5V

Microcontrollers on boards using the Arduino_Pro_Mini_5V

What boards using the Arduino_Pro_Mini_5V are built for

Arduino_Pro_Mini_5V: common questions

Where can I find a Arduino_Pro_Mini_5V reference design?

Each of the 10 boards on this page is a real design using the Arduino_Pro_Mini_5V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Arduino_Pro_Mini_5V pin 1 connected?

Pin 1 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the Arduino_Pro_Mini_5V.

How is the Arduino_Pro_Mini_5V pin 2 connected?

Pin 2 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the Arduino_Pro_Mini_5V.

How is the Arduino_Pro_Mini_5V pin 4 connected?

Pin 4 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the Arduino_Pro_Mini_5V.

What parts are used alongside the Arduino_Pro_Mini_5V?

The 8255, 74LS04, 74LS30, 2764 and HM62256BLP appear in the most repositories here.

Which microcontrollers do boards using the Arduino_Pro_Mini_5V use?

Most are built on AVR/Arduino (10).

How big is a typical board using the Arduino_Pro_Mini_5V?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the Arduino_Pro_Mini_5V?

By GitHub stars, PC-8001 SD by yanataka60, with 28 stars.

Can I simulate one of these boards using the Arduino_Pro_Mini_5V before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part