13 open source boards using the C84681

Real designs built with the C84681, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the C84681

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the C84681 connects to, and the resistors, capacitors and other passives placed on it.

  • The DSR pin is left unconnected on 12 of 12 designs.
  • The RI pin is left unconnected on 12 of 12 designs.
  • The DCD pin is left unconnected on 12 of 12 designs.
  • The R232 pin is left unconnected on 12 of 12 designs.
GNDpin 1Connected to: GND 100%
TXDpin 2Connected to: Signal 100%
  • Series resistor on 42% · 0 Ω (2), 470 Ω (2), 499 Ω (1)
RXDpin 3Connected to: Signal 100%
  • Series resistor on 42% · 0 Ω (2), 470 Ω (2), 499 Ω (1)
V3pin 4Connected to: Signal 67% · 3.3V 33%
  • Capacitor to GND on 67% · 100 nF (6), 1 µF (2), 10 µF (1)
NCpin 7, 8Connected to: Not connected 100%
CTSpin 9Connected to: Not connected 92%
DSRpin 10Connected to: Not connected 100%
RIpin 11Connected to: Not connected 100%
DCDpin 12Connected to: Not connected 100%
DTRpin 13Connected to: Signal 92%
  • Series resistor on 58% · 12 kΩ (4), 10 kΩ (2)
RTSpin 14Connected to: Signal 83% · not connected 17%
  • Series resistor on 58% · 12 kΩ (4), 10 kΩ (2)
R232pin 15Connected to: Not connected 100%
VCCpin 16Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 83% · 100 nF (7), 10 µF (3), 1 µF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Epdiy v7 by vroland, MRR ESPA by maplerainresearch, MRR ESPE by maplerainresearch and DCTransistor Bidirectional by LArkema.

The C84681 in open source designs

The gallery holds 13 open source boards using the C84681 from 11 GitHub repositories; a typical one measures about 100 × 98 mm and carries around 126 components.

77% are two-layer designs, the rest use four layers or more, and 77% carry an open source license.

The most starred is Kaleido 6" controller based on epdiy v7 by vroland.

Microcontrollers on boards using the C84681

C84681: common questions

Where can I find a C84681 reference design?

Each of the 13 boards on this page is a real design using the C84681. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the C84681 DSR pin connected?

The DSR pin is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the C84681.

How is the C84681 RI pin connected?

The RI pin is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the C84681.

How is the C84681 DCD pin connected?

The DCD pin is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the C84681.

What parts are used alongside the C84681?

The C6186, C16581, C27438, C45886 and C7843 appear in the most repositories here.

Which microcontrollers do boards using the C84681 use?

Most are built on ESP32 (7) and ESP8266 (4).

How big is a typical board using the C84681?

The median is 100 × 98 mm, and 77% are two-layer designs.

What is the most popular open source board using the C84681?

By GitHub stars, Kaleido 6" controller based on epdiy v7 by vroland, with 74 stars.

Can I simulate one of these boards using the C84681 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part