18 open source boards using the C85364
Real designs built with the C85364, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Main board
felixzero
84.5 × 54.6 mm75 parts2LGPL-3.07Usb uart shift
florolf
34.4 × 16 mm40 parts2LNo license7RP2040/RP2350
Rabid
SeanCline
343.4 × 121.9 mm185 parts2LMIT5STM32
Bd845-pwb board
bluedot-arcade
185 × 110 mm172 parts4LCERN-OHL-S-2.04Eink mahjong compass
ikuto0815
123.4 × 123.4 mm43 parts2LAGPL-3.03Nordic nRF
Obscura60
HNBN9
285 × 96.5 mm158 parts2LNo license0AVR/Arduino
Bakeneko-60
hsaito18
284.7 × 94.2 mm153 parts2LNo license0STM32
PCB DRONE R8
ArduProject
102 × 49 mm150 parts4LMIT0STM32
Micromouse
tadzio8425
99.3 × 98.9 mm97 parts4LMIT0RP2040/RP2350
KP08Hub
siderakb
82.6 × 66 mm87 parts2LMIT0RP2040/RP2350
Monorail Steam Reduced
KiserDesigns
242.9 × 95.3 mm185 parts2LNo license18RabidUsb costar
SeanCline
50 × 18 mm9 parts2LMIT5STM32
Grabert
hsaito18
285.8 × 120.7 mm78 parts2LNo license0AVR/Arduino
Motor board v3
felixzero
62 × 34 mm71 parts4LGPL-3.07RabidUsb ymdk
SeanCline
40.6 × 16.7 mm9 parts2LMIT5AVR/Arduino
Mini-Keyboard MKII
hsaito18
79 × 102.5 mm51 parts2LNo license0Usb test harness
karlp
103.6 × 71.8 mm94 parts4LNo license3AVR/Arduino
Keyboard MKI
hsaito18
79 × 102.5 mm48 parts2LNo license0
How designs wire the C85364
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the C85364 connects to, and the resistors, capacitors and other passives placed on it.
- The VN pin is tied to GND on 11 of 12 designs.
- The IO1 pin has a series resistor on 6 of 12 designs, most often 22 Ω (then 27 Ω).
- The IO4 pin has a series resistor on 5 of 12 designs, most often 27 Ω (then 22 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IO1pin 1 | Connected to: A connector 75% |
|
| VNpin 2 | Connected to: GND 92% | — |
| VPpin 5 | Connected to: 3.3V 67% · a signal 33% |
|
| IO4pin 6 | Connected to: A connector 67% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Monorail Steam Reduced by KiserDesigns, Main board by felixzero, Usb uart shift by florolf and Rabid by SeanCline.
The C85364 in open source designs
The gallery holds 18 open source boards using the C85364 from 12 GitHub repositories; a typical one measures about 100.6 × 94.7 mm and carries around 83 components.
72% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Monorail Steam Reduced by KiserDesigns.
Microcontrollers on boards using the C85364
What boards using the C85364 are built for
C85364: common questions
Where can I find a C85364 reference design?
Each of the 18 boards on this page is a real design using the C85364. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the C85364 VN pin connected?
The VN pin is tied to GND on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the C85364.
What resistor goes on the C85364 IO1 pin?
The IO1 pin has a series resistor on 6 of 12 designs, most often 22 Ω (then 27 Ω). Counted from the KiCad layouts of 12 open source designs using the C85364.
What resistor goes on the C85364 IO4 pin?
The IO4 pin has a series resistor on 5 of 12 designs, most often 27 Ω (then 22 Ω). Counted from the KiCad layouts of 12 open source designs using the C85364.
What parts are used alongside the C85364?
The C6186, C2040, C5446 and C97521 appear in the most repositories here.
Which microcontrollers do boards using the C85364 use?
Most are built on AVR/Arduino (4), STM32 (4), RP2040/RP2350 (3) and ESP32 (1).
How big is a typical board using the C85364?
The median is 100.6 × 94.7 mm, and 72% are two-layer designs.
What is the most popular open source board using the C85364?
By GitHub stars, Monorail Steam Reduced by KiserDesigns, with 18 stars.
Can I simulate one of these boards using the C85364 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.