7 open source boards using the CY62256

Real designs built with the CY62256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the CY62256

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the CY62256 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 14Connected to: GND 100%
VCCpin 28Connected to: VCC 100%

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, VideoRAM by slu4coder, SB-mini-II by simonboak and Av board by rjw57.

The CY62256 in open source designs

The gallery holds 7 open source boards using the CY62256 from 7 GitHub repositories; a typical one measures about 184.1 × 127 mm and carries around 83 components.

71% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is 8bit computer by vascofazza.

Microcontrollers on boards using the CY62256

CY62256: common questions

Where can I find a CY62256 reference design?

Each of the 7 boards on this page is a real design using the CY62256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the CY62256?

The 74HC00, 74HCT138, 28C64, 74HC04 and 74HC138 appear in the most repositories here.

Which microcontrollers do boards using the CY62256 use?

Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).

How big is a typical board using the CY62256?

The median is 184.1 × 127 mm, and 71% are two-layer designs.

What is the most popular open source board using the CY62256?

By GitHub stars, 8bit computer by vascofazza, with 314 stars.

Can I simulate one of these boards using the CY62256 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part