7 open source boards using the REF3033AIDBZT
Real designs built with the REF3033AIDBZT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Course MixedSignal
dpmj
55 × 80 mm110 parts4LCERN-OHL-S-2.02STM32
Mixed-Signal-Guitar-Effects-Pedal
danromero1
60 × 75 mm110 parts4LMIT2STM32
MixSig
a-s-adam
59.9 × 73.3 mm110 parts4LNo license0STM32
Mxed Signal
cristobalcuevas
60 × 75 mm110 parts4LNo license0STM32
Mixed-Signal STM32
cipher8-0
60.1 × 78 mm110 parts4LNo license0STM32
Fatigue-Measurement-Board
JJ80901
58 × 85 mm79 parts4LNo license0STM32
Mixed Signal Board
AhmedAbo-Eita
72.1 × 99 mm116 parts4LNo license3
How designs wire the REF3033AIDBZT
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the REF3033AIDBZT connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 7 of 7 designs, most often 10 µF.
- The OUT pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 10 µF).
- The IN pin has a pull-up to 5V on 6 of 7 designs, most often 49.9 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 100% |
|
| OUTpin 2 | Connected to: ADC141S626CIMM_NOPB 43%, ADC141S626CIMM/NOPB 43% |
|
| GNDpin 3 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mixed Signal Board by AhmedAbo-Eita, Mixed-Signal-Guitar-Effects-Pedal by danromero1, Course MixedSignalKicad by dpmj and MixSigPCB by a-s-adam.
The REF3033AIDBZT in open source designs
The gallery holds 7 open source boards using the REF3033AIDBZT from 7 GitHub repositories; a typical one measures about 60 × 78 mm and carries around 110 components.
100% use four copper layers or more, and 29% carry an open source license.
The most starred is Mixed Signal Board by AhmedAbo-Eita.
Parts used alongside the REF3033AIDBZT
Microcontrollers on boards using the REF3033AIDBZT
What boards using the REF3033AIDBZT are built for
REF3033AIDBZT: common questions
Where can I find a REF3033AIDBZT reference design?
Each of the 7 boards on this page is a real design using the REF3033AIDBZT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the REF3033AIDBZT IN pin connected?
The IN pin has a capacitor to GND on 7 of 7 designs, most often 10 µF. Counted from the KiCad layouts of 7 open source designs using the REF3033AIDBZT.
How is the REF3033AIDBZT OUT pin connected?
The OUT pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the REF3033AIDBZT.
What parts are used alongside the REF3033AIDBZT?
The USBLC6-2SC6, ADC141S626CIMM/NOPB, MCP6001T-E/OT, DAC7563SDGSR and HT7533-1 appear in the most repositories here.
Which microcontrollers do boards using the REF3033AIDBZT use?
Most are built on STM32 (7).
How big is a typical board using the REF3033AIDBZT?
The median is 60 × 78 mm, and 0% are two-layer designs.
What is the most popular open source board using the REF3033AIDBZT?
By GitHub stars, Mixed Signal Board by AhmedAbo-Eita, with 3 stars.
Can I simulate one of these boards using the REF3033AIDBZT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.