2 open source boards using the F0505S-1WR3

Real designs built with the F0505S-1WR3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The F0505S-1WR3 in open source designs

The gallery holds 2 open source boards using the F0505S-1WR3 from 2 GitHub repositories; a typical one measures about 283 × 113 mm and carries around 414 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is CellKeeper by cellkeeper-bms.

Microcontrollers on boards using the F0505S-1WR3

What boards using the F0505S-1WR3 are built for

F0505S-1WR3: common questions

Where can I find a F0505S-1WR3 reference design?

Each of the 2 boards on this page is a real design using the F0505S-1WR3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the F0505S-1WR3?

The ADS1115, AM26LV32EIDR, INA228, ISO1050DUB and ISO1540 appear in the most repositories here.

Which microcontrollers do boards using the F0505S-1WR3 use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the F0505S-1WR3?

The median is 283 × 113 mm, and 0% are two-layer designs.

What is the most popular open source board using the F0505S-1WR3?

By GitHub stars, CellKeeper by cellkeeper-bms, with 11 stars.

Can I simulate one of these boards using the F0505S-1WR3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part