8 open source boards using the UCC27524DR
Real designs built with the UCC27524DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
CellKeeper
cellkeeper-bms
260 × 113 mm405 parts4LGPL-3.011RP2040/RP2350
CellKeeper-BMS
clowrey
306 × 113 mm423 parts4LGPL-3.09STM32
Harpia
todio1155
93.6 × 93.8 mm182 parts6LCERN-OHL-S-2.01Aesa
tieziyun
192 × 315.1 mm2040 parts4LNo license0FE UFPR 4 0
josearistidesbail
159.6 × 130 mm313 parts4LNo license0STM32
Dcdc converter
shousei01
160 × 105 mm260 parts4LNo license0FilMachine Mainboard
yesnoj
110 × 90 mm198 parts4LNo license0Aesa test
tieziyun
100 × 90 mm62 parts2LNo license0
How designs wire the UCC27524DR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the UCC27524DR connects to, and the resistors, capacitors and other passives placed on it.
- The OUTB_5 pin has a series resistor on 6 of 7 designs, most often 33 Ω (then 100 Ω).
- The VDD_6 pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
- The OUTA_7 pin has a series resistor on 6 of 7 designs, most often 33 Ω (then 100 Ω).
- The INA_2 pin has a resistor to GND on 5 of 7 designs, most often 5.1 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENA_1pin 1 | Connected to: UCC27524DR 57%, the microcontroller 29% |
|
| INA_2pin 2 | Connected to: RP2354B 29% |
|
| GND_3pin 3 | Connected to: GND 100% | — |
| INB_4pin 4 | Connected to: RP2354B 29% |
|
| OUTB_5pin 5 | Connected to: Signal 86% |
|
| VDD_6pin 6 | Connected to: 5V 86% |
|
| OUTA_7pin 7 | Connected to: Signal 86% |
|
| ENB_8pin 8 | Connected to: UCC27524DR 57%, the microcontroller 29% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CellKeeper by cellkeeper-bms, CellKeeper-BMS-PCB by clowrey, Harpia by todio1155 and FE UFPR 4 0 by josearistidesbail.
The UCC27524DR in open source designs
The gallery holds 8 open source boards using the UCC27524DR from 7 GitHub repositories; a typical one measures about 159.8 × 109 mm and carries around 287 components.
88% use four copper layers or more, and 38% carry an open source license.
The most starred is CellKeeper by cellkeeper-bms.
Parts used alongside the UCC27524DR
Microcontrollers on boards using the UCC27524DR
What boards using the UCC27524DR are built for
UCC27524DR: common questions
Where can I find a UCC27524DR reference design?
Each of the 8 boards on this page is a real design using the UCC27524DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the UCC27524DR OUTB_5 pin?
The OUTB_5 pin has a series resistor on 6 of 7 designs, most often 33 Ω (then 100 Ω). Counted from the KiCad layouts of 7 open source designs using the UCC27524DR.
What decoupling capacitors do designs use on the UCC27524DR VDD_6 pin?
The VDD_6 pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the UCC27524DR.
What resistor goes on the UCC27524DR OUTA_7 pin?
The OUTA_7 pin has a series resistor on 6 of 7 designs, most often 33 Ω (then 100 Ω). Counted from the KiCad layouts of 7 open source designs using the UCC27524DR.
What parts are used alongside the UCC27524DR?
The ADS1115, AM26LV32EIDR, AMS1117-3.3, F0505S-1WR3 and INA228 appear in the most repositories here.
Which microcontrollers do boards using the UCC27524DR use?
Most are built on RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the UCC27524DR?
The median is 159.8 × 109 mm, and 13% are two-layer designs.
What is the most popular open source board using the UCC27524DR?
By GitHub stars, CellKeeper by cellkeeper-bms, with 11 stars.
Can I simulate one of these boards using the UCC27524DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.