23 open source boards using the HX6538

Real designs built with the HX6538, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the HX6538

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the HX6538 connects to, and the resistors, capacitors and other passives placed on it.

  • The SEN_I2CM_SCL pin has a pull-up to 1.8V on 23 of 23 designs, most often 2.2 kΩ.
  • The PA2 pin has a pull-up to 3.3V on 23 of 23 designs, most often 2.2 kΩ.
  • The QSPI_CS pin has a pull-up to 1.8V on 23 of 23 designs, most often 10 kΩ.
  • The SEN_I2CM_SDA pin has a pull-up to 1.8V on 23 of 23 designs, most often 2.2 kΩ.
SEN_INTpin A2Connected to: Not connected 100%
SEN_I2CM_SCLpin A3Connected to: Signal 100%
  • Pull-up to 1.8V on 100% · 2.2 kΩ (23)
PA2pin A4Connected to: XIAO Connector/DNP 100%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (23)
QSPI_CSpin B2Connected to: W25Q128JWSIQ 100%
  • Pull-up to 1.8V on 100% · 10 kΩ (23)
SEN_I2CM_SDApin B3Connected to: Signal 100%
  • Pull-up to 1.8V on 100% · 2.2 kΩ (23)
PA3pin B4Connected to: XIAO Connector/DNP 100%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (23)
SEN_GPIOpin C3Connected to: Not connected 100%
GND1pin C5Connected to: GND 100%
VDDIO_AONpin D5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (115), 10 µF (23)
TEST_MODEpin E4Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (23)
RESETNpin E5Connected to: XIAO Connector/DNP 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (23)
  • Capacitor to GND on 100% · 10 nF (23)
  • Series capacitor on 100% · 220 nF (23)
XTAL_24M_Opin F1Connected to: Signal 100%
  • Capacitor to GND on 100% · 12 pF (23)
  • Series resistor on 100% · 510 kΩ (23)
  • Crystal on 100% · 24 MHz (23)
VDDIO_SIF1pin F3Connected to: 1.8V 100%
  • Decoupling capacitor on 100% · 100 nF (69), 1 µF (23), 4.7 µF (23)
BOOT_OPTpin F4Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (23)
PB9pin F5Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (23)
SEN_D1pin G1Connected to: A connector 100%
  • Pull-up to 1.8V on 100%
XTAL_24M_Ipin G2Connected to: Signal 100%
  • Series resistor on 100% · 510 kΩ (23)
  • Crystal on 100% · 24 MHz (23)
  • Capacitor to GND on 100% · 12 pF (23)
VDDA_RXpin G3Connected to: 1.8V 100%
  • Decoupling capacitor on 100% · 100 nF (92), 1 µF (23), 4.7 µF (23)
GND2pin G4Connected to: GND 100%
PB10pin G5Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (23)
SEN_D0pin H1Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (23)
SEN_MCLKpin H2Connected to: Not connected 100%
GND3pin H3Connected to: GND 100%
TX_DN0pin H4Connected to: Not connected 100%
VDDA_TXpin H5Connected to: 1.8V 100%
  • Decoupling capacitor on 100% · 100 nF (69), 1 µF (23)
SEN_PCLKpin J1Connected to: Not connected 100%
SEN_D3pin J2Connected to: Not connected 100%
TX_CKNpin J4Connected to: Not connected 100%
TX_DP0pin J5Connected to: Not connected 100%
SEN_XSLEEPpin K1Connected to: Not connected 100%
SEN_D2pin K2Connected to: Signal 100%
  • Series resistor on 100% · 2.2 kΩ (23)
TX_CKPpin K3Connected to: Not connected 100%
TX_DP1pin K4Connected to: Not connected 100%
TX_DN1pin K5Connected to: Not connected 100%
VDDIO_SIF2pin L2Connected to: 1.8V 100%
  • Decoupling capacitor on 100% · 100 nF (92), 4.7 µF (23), 1 µF (23)
GND4pin L3Connected to: GND 100%
DCDC_OUTpin L4Connected to: 0.9V 100%
  • Inductor on 100%
VX1pin L5Connected to: Signal 100%
  • Inductor on 100%
GND5pin M2Connected to: GND 100%
PB3pin M3Connected to: XIAO Connector/DNP 100%, a connector 100%
  • Pull-up to 3.3V on 100%

25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Grove - Vision AI Module V2 by Josephrp, Grove - Vision AI Module V2 by ayaangrover, Grove - Vision AI Module V2 by hephaestushex and Grove - Vision AI Module V2 by dhirptl.

The HX6538 in open source designs

The gallery holds 23 open source boards using the HX6538 from 23 GitHub repositories; a typical one measures about 40 × 20 mm and carries around 112 components.

100% use four copper layers or more, and 26% carry an open source license.

The most starred is Grove - Vision AI Module V2 by Josephrp.

HX6538: common questions

Where can I find a HX6538 reference design?

Each of the 23 boards on this page is a real design using the HX6538. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the HX6538 SEN_I2CM_SCL pin?

The SEN_I2CM_SCL pin has a pull-up to 1.8V on 23 of 23 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 23 open source designs using the HX6538.

What pull-up resistor is used on the HX6538 PA2 pin?

The PA2 pin has a pull-up to 3.3V on 23 of 23 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 23 open source designs using the HX6538.

What pull-up resistor is used on the HX6538 QSPI_CS pin?

The QSPI_CS pin has a pull-up to 1.8V on 23 of 23 designs, most often 10 kΩ. Counted from the KiCad layouts of 23 open source designs using the HX6538.

What parts are used alongside the HX6538?

The CH343P, SY80004DQD, W25Q128JWSIQ and WR0331-18FF4R appear in the most repositories here.

How big is a typical board using the HX6538?

The median is 40 × 20 mm, and 0% are two-layer designs.

What is the most popular open source board using the HX6538?

By GitHub stars, Grove - Vision AI Module V2 by Josephrp, with 12 stars.

Can I simulate one of these boards using the HX6538 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part