26 open source boards using the W25Q128JWSIQ

Real designs built with the W25Q128JWSIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the W25Q128JWSIQ

Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the W25Q128JWSIQ connects to, and the resistors, capacitors and other passives placed on it.

  • The CS pin has a pull-up to 1.8V on 24 of 24 designs, most often 10 kΩ.
  • The VCC pin has a decoupling capacitor on 24 of 25 designs, most often 100 nF (then 1 µF).
CSpin 1Connected to: HX6538 96%
  • Pull-up to 1.8V on 100% · 10 kΩ (24)
GNDpin 4Connected to: GND 96%
VCCpin 8Connected to: 1.8V 100%
  • Decoupling capacitor on 96% · 100 nF (71), 1 µF (23)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Grove - Vision AI Module V2 by Josephrp, VersaSens by esl-epfl, Grove - Vision AI Module V2 by ayaangrover and Grove - Vision AI Module V2 by hephaestushex.

The W25Q128JWSIQ in open source designs

The gallery holds 26 open source boards using the W25Q128JWSIQ from 25 GitHub repositories; a typical one measures about 40 × 20 mm and carries around 112 components.

92% use four copper layers or more, and 31% carry an open source license.

The most starred is Grove - Vision AI Module V2 by Josephrp.

Parts used alongside the W25Q128JWSIQ

Microcontrollers on boards using the W25Q128JWSIQ

W25Q128JWSIQ: common questions

Where can I find a W25Q128JWSIQ reference design?

Each of the 26 boards on this page is a real design using the W25Q128JWSIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the W25Q128JWSIQ CS pin?

The CS pin has a pull-up to 1.8V on 24 of 24 designs, most often 10 kΩ. Counted from the KiCad layouts of 25 open source designs using the W25Q128JWSIQ.

What decoupling capacitors do designs use on the W25Q128JWSIQ VCC pin?

The VCC pin has a decoupling capacitor on 24 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the W25Q128JWSIQ.

What parts are used alongside the W25Q128JWSIQ?

The CH343P, HX6538, SY80004DQD and WR0331-18FF4R appear in the most repositories here.

Which microcontrollers do boards using the W25Q128JWSIQ use?

Most are built on ESP32 (1).

How big is a typical board using the W25Q128JWSIQ?

The median is 40 × 20 mm, and 8% are two-layer designs.

What is the most popular open source board using the W25Q128JWSIQ?

By GitHub stars, Grove - Vision AI Module V2 by Josephrp, with 12 stars.

Can I simulate one of these boards using the W25Q128JWSIQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part