23 open source boards using the WR0331-18FF4R

Real designs built with the WR0331-18FF4R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the WR0331-18FF4R

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the WR0331-18FF4R connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a inductor on 23 of 23 designs, most often 470 nH.
  • The IN pin has a inductor on 23 of 23 designs, most often 470 nH.
  • The OUT pin is tied to 1.8V on 23 of 23 designs.
  • The EN pin is tied to 3.3V on 23 of 23 designs.
OUTpin 1Connected to: 1.8V 100%
GNDpin 2, TConnected to: GND 100%
ENpin 3Connected to: 3.3V 100%
  • Inductor on 100% · 470 nH (23)
INpin 4Connected to: 3.3V 100%
  • Inductor on 100% · 470 nH (23)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Grove - Vision AI Module V2 by Josephrp, Grove - Vision AI Module V2 by ayaangrover, Grove - Vision AI Module V2 by hephaestushex and Grove - Vision AI Module V2 by dhirptl.

The WR0331-18FF4R in open source designs

The gallery holds 23 open source boards using the WR0331-18FF4R from 23 GitHub repositories; a typical one measures about 40 × 20 mm and carries around 112 components.

100% use four copper layers or more, and 26% carry an open source license.

The most starred is Grove - Vision AI Module V2 by Josephrp.

Parts used alongside the WR0331-18FF4R

WR0331-18FF4R: common questions

Where can I find a WR0331-18FF4R reference design?

Each of the 23 boards on this page is a real design using the WR0331-18FF4R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the WR0331-18FF4R EN pin connected?

The EN pin has a inductor on 23 of 23 designs, most often 470 nH. Counted from the KiCad layouts of 23 open source designs using the WR0331-18FF4R.

How is the WR0331-18FF4R IN pin connected?

The IN pin has a inductor on 23 of 23 designs, most often 470 nH. Counted from the KiCad layouts of 23 open source designs using the WR0331-18FF4R.

How is the WR0331-18FF4R OUT pin connected?

The OUT pin is tied to 1.8V on 23 of 23 designs. Counted from the KiCad layouts of 23 open source designs using the WR0331-18FF4R.

What parts are used alongside the WR0331-18FF4R?

The CH343P, HX6538, SY80004DQD and W25Q128JWSIQ appear in the most repositories here.

How big is a typical board using the WR0331-18FF4R?

The median is 40 × 20 mm, and 0% are two-layer designs.

What is the most popular open source board using the WR0331-18FF4R?

By GitHub stars, Grove - Vision AI Module V2 by Josephrp, with 12 stars.

Can I simulate one of these boards using the WR0331-18FF4R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part