23 open source boards using the SY80004DQD

Real designs built with the SY80004DQD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the SY80004DQD

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the SY80004DQD connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a series resistor on 23 of 23 designs, most often 10 kΩ.
  • The PG pin has a series resistor on 23 of 23 designs, most often 100 kΩ.
  • The FB pin has a pull-up to 3.3V on 23 of 23 designs, most often 100 kΩ.
  • The FB pin has a capacitor to the supply on 23 of 23 designs, most often 100 nF.
ENpin 1Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (23)
PGpin 2Connected to: Signal 100%
  • Series resistor on 100% · 100 kΩ (23)
FBpin 3Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 100 kΩ (23)
  • Capacitor to the supply on 100% · 100 nF (23)
  • Resistor to GND on 100% · 22 kΩ (23)
GNDpin 4Connected to: GND 100%
LXpin 5Connected to: Signal 100%
  • Inductor on 100% · 470 nH (23)
INpin 6Connected to: Signal 100%
  • Capacitor to GND on 100% · 4.7 µF (46), 100 nF (23)
  • Series resistor on 100% · 10 kΩ (23), 100 kΩ (23)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Grove - Vision AI Module V2 by Josephrp, Grove - Vision AI Module V2 by ayaangrover, Grove - Vision AI Module V2 by hephaestushex and Grove - Vision AI Module V2 by dhirptl.

The SY80004DQD in open source designs

The gallery holds 23 open source boards using the SY80004DQD from 23 GitHub repositories; a typical one measures about 40 × 20 mm and carries around 112 components.

100% use four copper layers or more, and 26% carry an open source license.

The most starred is Grove - Vision AI Module V2 by Josephrp.

Parts used alongside the SY80004DQD

SY80004DQD: common questions

Where can I find a SY80004DQD reference design?

Each of the 23 boards on this page is a real design using the SY80004DQD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SY80004DQD EN pin?

The EN pin has a series resistor on 23 of 23 designs, most often 10 kΩ. Counted from the KiCad layouts of 23 open source designs using the SY80004DQD.

What resistor goes on the SY80004DQD PG pin?

The PG pin has a series resistor on 23 of 23 designs, most often 100 kΩ. Counted from the KiCad layouts of 23 open source designs using the SY80004DQD.

What pull-up resistor is used on the SY80004DQD FB pin?

The FB pin has a pull-up to 3.3V on 23 of 23 designs, most often 100 kΩ. Counted from the KiCad layouts of 23 open source designs using the SY80004DQD.

What parts are used alongside the SY80004DQD?

The CH343P, HX6538, W25Q128JWSIQ and WR0331-18FF4R appear in the most repositories here.

How big is a typical board using the SY80004DQD?

The median is 40 × 20 mm, and 0% are two-layer designs.

What is the most popular open source board using the SY80004DQD?

By GitHub stars, Grove - Vision AI Module V2 by Josephrp, with 12 stars.

Can I simulate one of these boards using the SY80004DQD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part