4 open source boards using the I2C_OLED
Real designs built with the I2C_OLED, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32 VGM Player YM2612 SN76489
AidanHockey5
138.4 × 91.4 mm84 parts2LAGPL-3.0117Rtk datalogger
CMU-Robotics-Club
66 × 79.5 mm8 parts2LNo license2ZYQ15-HE
zfelix08
118.1 × 112.4 mm116 parts2LMIT1STM32 VGM Player YM2612 SN76489
Vakon84
138.4 × 91.4 mm84 parts2LAGPL-3.00
The I2C_OLED in open source designs
The gallery holds 4 open source boards using the I2C_OLED from 4 GitHub repositories; a typical one measures about 128.3 × 91.4 mm and carries around 84 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is STM32 VGM Player YM2612 SN76489 by AidanHockey5.
Parts used alongside the I2C_OLED
What boards using the I2C_OLED are built for
I2C_OLED: common questions
Where can I find a I2C_OLED reference design?
Each of the 4 boards on this page is a real design using the I2C_OLED. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the I2C_OLED?
The 23LC1024, BluePill_STM32F103C, CH340G, LD1117S33 and LM2596T-5 appear in the most repositories here.
How big is a typical board using the I2C_OLED?
The median is 128.3 × 91.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the I2C_OLED?
By GitHub stars, STM32 VGM Player YM2612 SN76489 by AidanHockey5, with 117 stars.
Can I simulate one of these boards using the I2C_OLED before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.