18 open source boards using the SN76489

Real designs built with the SN76489, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the SN76489

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the SN76489 connects to, and the resistors, capacitors and other passives placed on it.

  • The AIN pin is left unconnected on 12 of 14 designs (a signal on 2).
  • The READY pin is left unconnected on 10 of 15 designs (a signal on 5).
  • The AOUT pin has a series capacitor on 7 of 14 designs, most often 1 µF (then 100 nF).
READYpin 4Connected to: Not connected 67% · a signal 33%
AOUTpin 7Connected to: Signal 100%
  • Series capacitor on 50% · 1 µF (5), 100 nF (4), 100 µF (3)
GNDpin 8Connected to: GND 100%
AINpin 9Connected to: Not connected 86%
VCCpin 16Connected to: 5V 100%
  • Decoupling capacitor on 33% · 100 nF (4)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32 VGM Player YM2612 SN76489 by AidanHockey5, MegaMIDI by AidanHockey5, Genny by superjoebob and MegaBlaster2 by AidanHockey5.

The SN76489 in open source designs

The gallery holds 18 open source boards using the SN76489 from 17 GitHub repositories; a typical one measures about 124.5 × 100 mm and carries around 90 components.

88% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is STM32 VGM Player YM2612 SN76489 by AidanHockey5.

Microcontrollers on boards using the SN76489

SN76489: common questions

Where can I find a SN76489 reference design?

Each of the 18 boards on this page is a real design using the SN76489. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN76489 AIN pin connected?

The AIN pin is left unconnected on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 15 open source designs using the SN76489.

How is the SN76489 READY pin connected?

The READY pin is left unconnected on 10 of 15 designs (a signal on 5). Counted from the KiCad layouts of 15 open source designs using the SN76489.

How is the SN76489 AOUT pin connected?

The AOUT pin has a series capacitor on 7 of 14 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 15 open source designs using the SN76489.

What parts are used alongside the SN76489?

The YM2612, LM386, 74LS244, 74LS138 and 74LS245 appear in the most repositories here.

Which microcontrollers do boards using the SN76489 use?

Most are built on AVR/Arduino (3), ESP32 (3), NXP (2) and RP2040/RP2350 (2).

How big is a typical board using the SN76489?

The median is 124.5 × 100 mm, and 88% are two-layer designs.

What is the most popular open source board using the SN76489?

By GitHub stars, STM32 VGM Player YM2612 SN76489 by AidanHockey5, with 117 stars.

Can I simulate one of these boards using the SN76489 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part