9 open source boards using the LD1117S12TR_SOT223
Real designs built with the LD1117S12TR_SOT223, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
M68k
annoyatron255
100 × 100 mm105 parts2LNo license24STM32
Iceskate
icerink
23.6 × 57.7 mm37 parts2LCERN-OHL-1.218STM32
Sensored-3-P-BLDC-Closed-Loop-V1
g-rahul
100 × 100 mm114 parts2LNo license5EVD80 MCU
Alexandr-Filatov
236 × 150 mm746 parts6LNo license0KSZ9031RNXCC
Lampranthus
54 × 47.5 mm63 parts2LMIT0STM32
Stm devboard
AYUSH-pro-grammer
65 × 75 mm62 parts4LNo license0RP2040/RP2350
Microphone
joshitha-c
33.3 × 36.5 mm28 parts2LNo license0GfxVGA
ddraig68k
100 × 100 mm96 parts4LMIT29ESP8266
Espsense
larsimmisch
66 × 68.6 mm20 parts2LNo license0
How designs wire the LD1117S12TR_SOT223
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LD1117S12TR_SOT223 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 1.2V 100% | — |
| VIpin 3 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GfxVGA by ddraig68k, M68k by annoyatron255, Iceskate by icerink and Sensored-3-P-BLDC-Closed-Loop-V1 by g-rahul.
The LD1117S12TR_SOT223 in open source designs
The gallery holds 9 open source boards using the LD1117S12TR_SOT223 from 9 GitHub repositories; a typical one measures about 66 × 75 mm and carries around 63 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is GfxVGA by ddraig68k.
Parts used alongside the LD1117S12TR_SOT223
Microcontrollers on boards using the LD1117S12TR_SOT223
What boards using the LD1117S12TR_SOT223 are built for
LD1117S12TR_SOT223: common questions
Where can I find a LD1117S12TR_SOT223 reference design?
Each of the 9 boards on this page is a real design using the LD1117S12TR_SOT223. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD1117S12TR_SOT223 VI pin?
The VI pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the LD1117S12TR_SOT223.
What parts are used alongside the LD1117S12TR_SOT223?
The LD1117S33TR_SOT223, SN74LVC8T245PWR and USBLC6-2P6 appear in the most repositories here.
Which microcontrollers do boards using the LD1117S12TR_SOT223 use?
Most are built on STM32 (3), ESP8266 (1), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the LD1117S12TR_SOT223?
The median is 66 × 75 mm, and 67% are two-layer designs.
What is the most popular open source board using the LD1117S12TR_SOT223?
By GitHub stars, GfxVGA by ddraig68k, with 29 stars.
Can I simulate one of these boards using the LD1117S12TR_SOT223 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.