10 open source boards using the AT28C64B

Real designs built with the AT28C64B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the AT28C64B

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the AT28C64B connects to, and the resistors, capacitors and other passives placed on it.

  • The A14 pin is left unconnected on 8 of 10 designs (GND on 2).
  • The A13 pin is left unconnected on 7 of 10 designs (GND on 2).
  • The WE pin is tied to 5V on 6 of 10 designs (a signal on 4).
  • The VCC pin has a decoupling capacitor on 5 of 10 designs, most often 100 nF.
A14pin 1Connected to: Not connected 80% · GND 20%
GNDpin 14Connected to: GND 80% · a signal 20%
A13pin 26Connected to: Not connected 70% · GND 20%
WEpin 27Connected to: 5V 60% · a signal 40%
VCCpin 28Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 50% · 100 nF (5)

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SCOPETREX by schlae, Apple2-IO-RPi by tjboldt, Cpu board by rjw57 and Nestronic Game Music Synthesizer by dkonigsberg.

The AT28C64B in open source designs

The gallery holds 10 open source boards using the AT28C64B from 10 GitHub repositories; a typical one measures about 155.4 × 107.2 mm and carries around 71 components.

90% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is SCOPETREX by schlae.

Microcontrollers on boards using the AT28C64B

What boards using the AT28C64B are built for

AT28C64B: common questions

Where can I find a AT28C64B reference design?

Each of the 10 boards on this page is a real design using the AT28C64B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the AT28C64B A14 pin connected?

The A14 pin is left unconnected on 8 of 10 designs (GND on 2). Counted from the KiCad layouts of 10 open source designs using the AT28C64B.

How is the AT28C64B A13 pin connected?

The A13 pin is left unconnected on 7 of 10 designs (GND on 2). Counted from the KiCad layouts of 10 open source designs using the AT28C64B.

How is the AT28C64B WE pin connected?

The WE pin is tied to 5V on 6 of 10 designs (a signal on 4). Counted from the KiCad layouts of 10 open source designs using the AT28C64B.

What parts are used alongside the AT28C64B?

The 74LS00, 74LS32, 4066, 74HCT138 and 74HCT139 appear in the most repositories here.

Which microcontrollers do boards using the AT28C64B use?

Most are built on ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the AT28C64B?

The median is 155.4 × 107.2 mm, and 90% are two-layer designs.

What is the most popular open source board using the AT28C64B?

By GitHub stars, SCOPETREX by schlae, with 245 stars.

Can I simulate one of these boards using the AT28C64B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part