8 open source boards using the 74LS112
Real designs built with the 74LS112, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SCOPETREX
schlae
177.8 × 127 mm197 parts2LNo license245CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17AVR/Arduino
CortexPC
danwerner21
244 × 244 mm155 parts2LNo license7BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT2Exordisk v1
roberto314
160 × 100 mm110 parts2LNo license1SCOPETREX
magikghost
177.8 × 127 mm197 parts2LNo license0FPGA
DragonATXProto
jimbro1000
169.7 × 229.8 mm102 parts2LNo license0AVR/Arduino
6502atty
bendooks
112.5 × 124.5 mm98 parts2LCERN-OHL-S-2.00
How designs wire the 74LS112
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74LS112 connects to, and the resistors, capacitors and other passives placed on it.
- The S pins is tied to 5V on 63% of them (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Spin 4, 10 | Connected to: 5V 63% · a signal 31% | — |
| Qpin 5, 6, 7, 9 | Connected to: A connector 22% · not connected 47% |
|
| GNDpin 8 | Connected to: GND 88% | — |
| VCCpin 16 | Connected to: 5V 88% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SCOPETREX by schlae, CompaqportableIII by raymondh2, CortexPC by danwerner21 and BitStack-DigiTrainer by RetroStack.
The 74LS112 in open source designs
The gallery holds 8 open source boards using the 74LS112 from 8 GitHub repositories; a typical one measures about 177.8 × 138.5 mm and carries around 139 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is SCOPETREX by schlae.
Parts used alongside the 74LS112
Microcontrollers on boards using the 74LS112
What boards using the 74LS112 are built for
74LS112: common questions
Where can I find a 74LS112 reference design?
Each of the 8 boards on this page is a real design using the 74LS112. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS112 S pin connected?
The S pins is tied to 5V on 63% of them (a signal on 5). Counted from the KiCad layouts of 8 open source designs using the 74LS112.
What parts are used alongside the 74LS112?
The 74LS32, 74LS00, 74LS04, 74LS08 and 74LS244 appear in the most repositories here.
Which microcontrollers do boards using the 74LS112 use?
Most are built on AVR/Arduino (2) and FPGA (1).
How big is a typical board using the 74LS112?
The median is 177.8 × 138.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS112?
By GitHub stars, SCOPETREX by schlae, with 245 stars.
Can I simulate one of these boards using the 74LS112 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.