9 open source boards using the MS88SF2

Real designs built with the MS88SF2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the MS88SF2

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MS88SF2 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 100 nF).
  • The VDDH pin has a capacitor to GND on 5 of 8 designs, most often 10 µF (then 100 nF).
GNDpin 1, 13Connected to: GND 75%
VDDpin 14Connected to: 3.3V 63%
  • Decoupling capacitor on 63% · 10 µF (3), 100 nF (1), 220 nF (1)
VDDHpin 15Connected to: Signal 50% · 5V 38%
  • Capacitor to GND on 63% · 10 µF (4), 100 nF (2)
P0.18/RESETpin 20Connected to: A connector 50%
  • Series resistor on 38% · 100 Ω (3)
  • Pull-up to 5V on 38% · 10 kΩ (3)

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Le chiff ble by MangoIV, KlackerBS by weteor, Nrf52840-x3 by ugokutennp and Ms88sf2-breakboard by galopago.

The MS88SF2 in open source designs

The gallery holds 9 open source boards using the MS88SF2 from 8 GitHub repositories; a typical one measures about 79.9 × 36.8 mm and carries around 20 components.

89% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.

The most starred is Le chiff ble by MangoIV.

MS88SF2: common questions

Where can I find a MS88SF2 reference design?

Each of the 9 boards on this page is a real design using the MS88SF2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MS88SF2 VDD pin?

The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the MS88SF2.

How is the MS88SF2 VDDH pin connected?

The VDDH pin has a capacitor to GND on 5 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the MS88SF2.

What parts are used alongside the MS88SF2?

The DW01A, FS8205, TP4056, USBLC6-2SC6 and XC6206PXXXMR-REGULATOR_LINEAR appear in the most repositories here.

How big is a typical board using the MS88SF2?

The median is 79.9 × 36.8 mm, and 89% are two-layer designs.

What is the most popular open source board using the MS88SF2?

By GitHub stars, Le chiff ble by MangoIV, with 52 stars.

Can I simulate one of these boards using the MS88SF2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part