13 open source boards using the RP2350B-QFN80

Real designs built with the RP2350B-QFN80, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the RP2350B-QFN80

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the RP2350B-QFN80 connects to, and the resistors, capacitors and other passives placed on it.

  • The IOVDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 4.7 µF).
  • The DVDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 4.7 µF).
  • The XIN pin has a capacitor to GND on 11 of 11 designs, most often 15 pF (then 33 pF).
  • The XIN pin has a crystal on 11 of 11 designs, most often 12 MHz.
IOVDDpin 5, 15, 24, 29, 41, 50, 60, 76Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (165), 4.7 µF (14), 10 µF (3)
DVDDpin 10, 32, 51Connected to: 1.1V 100%
  • Decoupling capacitor on 100% · 100 nF (19), 4.7 µF (8)
GPIO19pin 19Connected to: A connector 36%
  • Pull-up to 3.3V on 36% · 1 kΩ (2), 5.1 kΩ (1), 10 kΩ (1)
GPIO27pin 28Connected to: A connector 27%
  • Series resistor on 36% · 100 Ω (2), 220 Ω (2)
XINpin 30Connected to: Signal 100%
  • Capacitor to GND on 100% · 15 pF (9), 33 pF (2)
  • Crystal on 100% · 12 MHz (3)
XOUTpin 31Connected to: Signal 100%
  • Series resistor on 82% · 1 kΩ (9)
GPIO28pin 36Connected to: A connector 27% · not connected 18%
  • Pull-up to 3.3V on 36% · 1 kΩ (2), 10 kΩ (2)
GPIO31pin 39Connected to: A connector 36%
  • Pull-up to 3.3V on 36% · 5.1 kΩ (2), 10 kΩ (2)
GPIO35pin 44Connected to: A connector 45% · not connected 18%
  • Pull-up to 3.3V on 36% · 1 kΩ (2), 10 kΩ (2)
GPIO43_ADC3pin 54Connected to: A connector 45% · not connected 18%
  • Pull-up to 3.3V on 36% · 1 kΩ (2), 5.1 kΩ (1), 47 kΩ (1)
ADC_AVDDpin 59Connected to: 3.3V 91%
  • Decoupling capacitor on 100% · 100 nF (17), 4.7 µF (6), 1 µF (1)
VREG_AVDDpin 61Connected to: Signal 55% · VREG_AVDD 45%
  • Capacitor to GND on 100% · 4.7 µF (9)
  • Pull-up to 3.3V on 55% · 33 Ω (5), 27 Ω (1)
VREG_PGNDpin 62Connected to: GND 100%
VREG_LXpin 63Connected to: Signal 55% · VREG_LX 45%
  • Inductor on 82% · 3.3 µH (9)
VREG_VINpin 64Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (19), 4.7 µF (7), 1 µF (1)
VREG_FBpin 65Connected to: 1.1V 100%
  • Decoupling capacitor on 91% · 4.7 µF (8), 100 nF (1)
  • Inductor on 73% · 3.3 µH (8)
USB_DMpin 66Connected to: Signal 100%
  • Series resistor on 91% · 27 Ω (6), 22 Ω (2), 33 Ω (2)
USB_DPpin 67Connected to: Signal 100%
  • Series resistor on 91% · 27 Ω (6), 22 Ω (2), 33 Ω (2)
USB_OTP_VDDpin 68Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (22), 4.7 µF (7), 1 µF (1)
QSPI_IOVDDpin 69Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (20), 4.7 µF (6), 1 µF (1)
QSPI_SSpin 75Connected to: W25Q128JVS 55%
  • Series resistor on 91% · 1 kΩ (10), 0 Ω (2)
GNDpin 81Connected to: GND 100%

50 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OSS Radio Hardware Design by Arkos-Engineering, Pro rev1 by TheRetroWeb, Whitefox by nxrmqlly and Line 2026 v1 by Gamu2124.

The RP2350B-QFN80 in open source designs

The gallery holds 13 open source boards using the RP2350B-QFN80 from 11 GitHub repositories; a typical one measures about 102.6 × 100.5 mm and carries around 130 components.

54% use four copper layers or more, and 15% carry an open source license.

The most starred is OSS Radio Hardware Design by Arkos-Engineering.

Parts used alongside the RP2350B-QFN80

Microcontrollers on boards using the RP2350B-QFN80

RP2350B-QFN80: common questions

Where can I find a RP2350B-QFN80 reference design?

Each of the 13 boards on this page is a real design using the RP2350B-QFN80. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the RP2350B-QFN80 IOVDD pin?

The IOVDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the RP2350B-QFN80.

What decoupling capacitors do designs use on the RP2350B-QFN80 DVDD pin?

The DVDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the RP2350B-QFN80.

How is the RP2350B-QFN80 XIN pin connected?

The XIN pin has a capacitor to GND on 11 of 11 designs, most often 15 pF (then 33 pF). Counted from the KiCad layouts of 11 open source designs using the RP2350B-QFN80.

What parts are used alongside the RP2350B-QFN80?

The W25Q128JVS, AMS1117-3.3, AP63203WU, LM393 and W25Q32JVSS appear in the most repositories here.

Which microcontrollers do boards using the RP2350B-QFN80 use?

Most are built on RP2040/RP2350 (13).

How big is a typical board using the RP2350B-QFN80?

The median is 102.6 × 100.5 mm, and 46% are two-layer designs.

What is the most popular open source board using the RP2350B-QFN80?

By GitHub stars, OSS Radio Hardware Design by Arkos-Engineering, with 75 stars.

Can I simulate one of these boards using the RP2350B-QFN80 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part