15 open source boards using the SN74LVC1G04DBVR(SOT23-5)

Real designs built with the SN74LVC1G04DBVR(SOT23-5), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the SN74LVC1G04DBVR(SOT23-5)

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC1G04DBVR(SOT23-5) connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 5 has a decoupling capacitor on 6 of 6 designs, most often 100 nF.
  • Pin 1 is left unconnected on 6 of 6 designs.
  • Pin 3 is tied to GND on 6 of 6 designs.
  • Pin 5 is tied to 3.3V on 6 of 6 designs.
Pin 1Connected to: Not connected 100%
Pin 2Connected to: A connector 100%, the microcontroller 100%
  • Pull-up to 3.3V on 33%
Pin 3Connected to: GND 100%
Pin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (6)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev J by OLIMEX, ESP32-PoE-ISO Rev J by OLIMEX, ESP32-SBC-FabGL Rev A by OLIMEX and Schemantic by ashutosh-rath02.

The SN74LVC1G04DBVR(SOT23-5) in open source designs

The gallery holds 15 open source boards using the SN74LVC1G04DBVR(SOT23-5) from 6 GitHub repositories; a typical one measures about 28 × 80 mm and carries around 130 components.

87% use four copper layers or more, and 60% carry an open source license.

The most starred is ESP32-PoE Rev L by OLIMEX.

Microcontrollers on boards using the SN74LVC1G04DBVR(SOT23-5)

What boards using the SN74LVC1G04DBVR(SOT23-5) are built for

SN74LVC1G04DBVR(SOT23-5): common questions

Where can I find a SN74LVC1G04DBVR(SOT23-5) reference design?

Each of the 15 boards on this page is a real design using the SN74LVC1G04DBVR(SOT23-5). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G04DBVR(SOT23-5) pin 5?

Pin 5 has a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G04DBVR(SOT23-5).

How is the SN74LVC1G04DBVR(SOT23-5) pin 1 connected?

Pin 1 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G04DBVR(SOT23-5).

How is the SN74LVC1G04DBVR(SOT23-5) pin 3 connected?

Pin 3 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G04DBVR(SOT23-5).

What parts are used alongside the SN74LVC1G04DBVR(SOT23-5)?

The BL4054B-42TPRN(SOT23-5), SY8089AAAC(SOT23-5), CH340T(SSOP20W), LAN8710A-EZC(QFN32) and TX4138(ESOIC-8) appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G04DBVR(SOT23-5) use?

Most are built on ESP32 (15).

How big is a typical board using the SN74LVC1G04DBVR(SOT23-5)?

The median is 28 × 80 mm, and 13% are two-layer designs.

What is the most popular open source board using the SN74LVC1G04DBVR(SOT23-5)?

By GitHub stars, ESP32-PoE Rev L by OLIMEX, with 407 stars.

Can I simulate one of these boards using the SN74LVC1G04DBVR(SOT23-5) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part