13 open source boards using the TLV62569DRLR
Real designs built with the TLV62569DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
ECPBreaker
gregdavill
50 × 37 mm117 parts6LNo license178FPGA
ECP5 Mini
joshajohnson
52 × 27 mm99 parts4LCERN-OHL-S-2.091ESP32
Sapphire Captain
gregdavill
50 × 31 mm68 parts4LNo license28ESP32
Wizard flute
gregdavill
40.1 × 12.7 mm49 parts4LNo license8ESP32
Tinker mantis
Tinkerbug-Robotics
22.4 × 75 mm264 parts8LGPL-3.00ESP32
Pajoniiir-M1
dvucinozd
175.6 × 220.1 mm223 parts4LNo license0Tablet-Project
ShresthRao
40.3 × 155 mm115 parts4LNo license0FPGA
ICEBreaker+++
gregdavill
56 × 37 mm104 parts4LNo license178ESP32
Panel
gregdavill
95.2 × 81.7 mm49 parts4LNo license8ESP32
Esp32s2-co2-monitor
gregdavill
70.3 × 42.8 mm67 parts4LNo license178ESP32
ESP32S2 Breakout
gregdavill
70.3 × 42.8 mm64 parts4LNo license178ESP32
Esp32s2-lepton
gregdavill
34.6 × 30.8 mm62 parts4LNo license178FPGA
Resonance
gregdavill
45 × 35.5 mm60 parts4LNo license178
How designs wire the TLV62569DRLR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV62569DRLR connects to, and the resistors, capacitors and other passives placed on it.
- The FB pin has a resistor to GND on 7 of 7 designs, most often 47 kΩ (then 499 kΩ).
- The SW pin has a inductor on 7 of 7 designs, most often 2.2 µH.
- The FB pin has a pull-up to 3.3V on 5 of 7 designs, most often 210 kΩ (then 120 kΩ).
- The VIN pin has a decoupling capacitor on 5 of 7 designs, most often 4.7 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FBpin 1 | Connected to: The microcontroller 29% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VINpin 3 | Connected to: 5V 86% |
|
| SWpin 4 | Connected to: Signal 100% |
|
| NCpin 6 | Connected to: Not connected 86% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ECPBreaker by gregdavill, ECP5 Mini by joshajohnson, Sapphire Captain by gregdavill and Wizard flute by gregdavill.
The TLV62569DRLR in open source designs
The gallery holds 13 open source boards using the TLV62569DRLR from 7 GitHub repositories; a typical one measures about 50 × 37 mm and carries around 68 components.
100% use four copper layers or more, and 15% carry an open source license.
The most starred is ECPBreaker by gregdavill.
Parts used alongside the TLV62569DRLR
What boards using the TLV62569DRLR are built for
TLV62569DRLR: common questions
Where can I find a TLV62569DRLR reference design?
Each of the 13 boards on this page is a real design using the TLV62569DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV62569DRLR FB pin?
The FB pin has a resistor to GND on 7 of 7 designs, most often 47 kΩ (then 499 kΩ). Counted from the KiCad layouts of 7 open source designs using the TLV62569DRLR.
How is the TLV62569DRLR SW pin connected?
The SW pin has a inductor on 7 of 7 designs, most often 2.2 µH. Counted from the KiCad layouts of 7 open source designs using the TLV62569DRLR.
What decoupling capacitors do designs use on the TLV62569DRLR VIN pin?
The VIN pin has a decoupling capacitor on 5 of 7 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TLV62569DRLR.
What parts are used alongside the TLV62569DRLR?
The USBLC6-2P6, ESP32-S2, W25Q128JVPIQ and W25Q32JVZPIQ appear in the most repositories here.
Which microcontrollers do boards using the TLV62569DRLR use?
Most are built on ESP32 (8) and FPGA (4).
How big is a typical board using the TLV62569DRLR?
The median is 50 × 37 mm, and 0% are two-layer designs.
What is the most popular open source board using the TLV62569DRLR?
By GitHub stars, ECPBreaker by gregdavill, with 178 stars.
Can I simulate one of these boards using the TLV62569DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.