18 open source boards using the ESP32-S2

Real designs built with the ESP32-S2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the ESP32-S2

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the ESP32-S2 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDA pins have a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
  • The VDD3P3 pins have a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
  • The VDD3P3_RTC pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
  • The VDD3P3_RTC_IO pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
VDDApin 1, 51, 54Connected to: 3.3V 75% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (38), 1 µF (32), 110 nF (11)
LNA_INpin 2Connected to: Signal 75% · not connected 25%
  • Capacitor to GND on 50% · 1.8 pF (2)
  • Inductor on 50% · 1.8 nH (1), 2.4 nH (1)
VDD3P3pin 3, 4Connected to: VDD3P3 75% · a signal 25%
  • Decoupling capacitor on 83% · 100 nF (20), 1 µF (10), 110 nF (8)
  • Inductor on 33% · 2 nH (8)
GPIO0pin 5Connected to: A connector 25%
  • Pull-up to 3.3V on 58% · 10 kΩ (4), 5.1 kΩ (2), 100 kΩ (1)
VDD3P3_RTCpin 20Connected to: 3.3V 75% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (13), 1 µF (6), 10 µF (5)
XTAL_32K_Ppin 21Connected to: Not connected 67% · a signal 33%
XTAL_32K_Npin 22Connected to: Not connected 67% · a signal 33%
GPIO19pin 25Connected to: A connector 33% · not connected 25%
  • Series resistor on 33% · 22 Ω (3)
GPIO20pin 26Connected to: A connector 33% · not connected 25%
  • Series resistor on 33% · 22 Ω (3)
VDD3P3_RTC_IOpin 27Connected to: 3.3V 75% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (13), 1 µF (5), 10 µF (4)
SPICS1pin 29Connected to: Not connected 75% · a signal 17%
VDD_SPIpin 30Connected to: VDD_SPI 67% · a signal 25%
  • Decoupling capacitor on 75% · 1 µF (8), 100 nF (4), 110 nF (4)
VDD3P3_CPUpin 45Connected to: 3.3V 75% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (11), 1 µF (9), 10 µF (3)
XTAL_Npin 52Connected to: Signal 83% · not connected 17%
  • Crystal on 83% · 40 MHz (8)
  • Capacitor to GND on 83% · 10 pF (5), 18 pF (2), 2.2 pF (1)
XTAL_Ppin 53Connected to: Signal 83% · not connected 17%
  • Crystal on 58% · 40 MHz (6)
  • Capacitor to GND on 58% · 10 pF (4), 18 pF (2), 2.2 pF (1)
CHIP_PUpin 56Connected to: A connector 33%
  • Pull-up to 3.3V on 75% · 10 kΩ (6), 5.1 kΩ (2), 100 kΩ (1)
  • Capacitor to GND on 67% · 100 nF (4), 1 µF (4), 10 µF (2)
GNDpin 57Connected to: GND 100%

37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S2 Breakout by gregdavill, Esp32s2-funprog by cnlohr, Exposed power rails by OLIMEX and DRM Watch v3 by drfailov.

The ESP32-S2 in open source designs

The gallery holds 18 open source boards using the ESP32-S2 from 11 GitHub repositories; a typical one measures about 34.8 × 38.1 mm and carries around 51 components.

67% use four copper layers or more, and 39% carry an open source license.

The most starred is Esp32s2-co2-monitor by gregdavill.

Microcontrollers on boards using the ESP32-S2

ESP32-S2: common questions

Where can I find a ESP32-S2 reference design?

Each of the 18 boards on this page is a real design using the ESP32-S2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ESP32-S2 VDDA pin?

The VDDA pins have a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the ESP32-S2.

What decoupling capacitors do designs use on the ESP32-S2 VDD3P3 pin?

The VDD3P3 pins have a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the ESP32-S2.

What decoupling capacitors do designs use on the ESP32-S2 VDD3P3_RTC pin?

The VDD3P3_RTC pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the ESP32-S2.

What parts are used alongside the ESP32-S2?

The USBLC6-2P6, TLV62569DRLR, TLV75733PDBV, W25Q128JVS and W25Q32JVZPIQ appear in the most repositories here.

Which microcontrollers do boards using the ESP32-S2 use?

Most are built on ESP32 (17) and RP2040/RP2350 (1).

How big is a typical board using the ESP32-S2?

The median is 34.8 × 38.1 mm, and 33% are two-layer designs.

What is the most popular open source board using the ESP32-S2?

By GitHub stars, Esp32s2-co2-monitor by gregdavill, with 178 stars.

Can I simulate one of these boards using the ESP32-S2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part