4 open source boards using the TPD4EUSB30DQAR-N
Real designs built with the TPD4EUSB30DQAR-N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Dual Axis Controller
jrseti
140 × 100 mm307 parts4LCC0-1.00STM32
RCM DishControllerBoard
jrseti
140 × 100 mm304 parts4LMIT0Raspberry Pi
Roboclaw cm4-dc dish controller
jrseti
145.8 × 76.9 mm49 parts2LMIT0Raspberry Pi
Cm4-robo controller
jrseti
145.8 × 76.9 mm49 parts2LCC0-1.00
The TPD4EUSB30DQAR-N in open source designs
The gallery holds 4 open source boards using the TPD4EUSB30DQAR-N from 3 GitHub repositories; a typical one measures about 142.9 × 88.4 mm and carries around 177 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Dual Axis Controller by jrseti.
Parts used alongside the TPD4EUSB30DQAR-N
Microcontrollers on boards using the TPD4EUSB30DQAR-N
What boards using the TPD4EUSB30DQAR-N are built for
TPD4EUSB30DQAR-N: common questions
Where can I find a TPD4EUSB30DQAR-N reference design?
Each of the 4 boards on this page is a real design using the TPD4EUSB30DQAR-N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPD4EUSB30DQAR-N?
The AP22653W6-7, FSUSB42MUX, TPD4EUSB30DQAR, USB2514B-I/M2 and 74LVC1G07SE-7 appear in the most repositories here.
Which microcontrollers do boards using the TPD4EUSB30DQAR-N use?
Most are built on Raspberry Pi (2) and STM32 (2).
How big is a typical board using the TPD4EUSB30DQAR-N?
The median is 142.9 × 88.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPD4EUSB30DQAR-N?
By GitHub stars, Dual Axis Controller by jrseti, with 0 stars.
Can I simulate one of these boards using the TPD4EUSB30DQAR-N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.