11 open source boards using the TPS259474LRPWR
Real designs built with the TPS259474LRPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Parsnip
LimesKey
60 × 130 mm400 parts4LCC-BY-NC-4.04RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1ESP32
Assembly preview
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00STM32
BDSM G144
matatma23-gento
247.9 × 172.6 mm304 parts4LNo license0Airgrep
mp911de
105 × 95 mm175 parts4LNo license0ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00STM32
Keel
BisocMOrg
106 × 150 mm147 parts6LMIT0ESP32
Smart iv monitor
kylepretty
79.5 × 83.8 mm106 parts2LNo license0RP2040/RP2350
Make Music
John-ODell
330 × 121.5 mm47 parts2LNo license0ESP32
Carrier
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00Tc2-plugs buck boost
TheCacophonyProject
65 × 19.5 mm65 parts6LCERN-OHL-W-2.00
How designs wire the TPS259474LRPWR
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TPS259474LRPWR connects to, and the resistors, capacitors and other passives placed on it.
- The OVLO_2 pin has a resistor to GND on 10 of 10 designs, most often 10 kΩ (then 100 kΩ).
- The ILM_9 pin has a resistor to GND on 10 of 10 designs, most often 6.65 kΩ (then 1.69 kΩ).
- The EN/UVLO_1 pin has a resistor to GND on 7 of 10 designs, most often 100 kΩ (then 332 kΩ).
- The IN_5 pin has a capacitor to GND on 7 of 10 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| EN/UVLO_1pin 1 | Connected to: Signal 100% |
|
| OVLO_2pin 2 | Connected to: Signal 100% |
|
| PG_3pin 3 | Connected to: Not connected 60% · a signal 40% |
|
| PGTH_4pin 4 | Connected to: Signal 50% · not connected 20% · GND 30% |
|
| IN_5pin 5 | Connected to: VBUS 50% · a signal 50% |
|
| OUT_6pin 6 | Connected to: 3.3V 70% · a signal 30% | — |
| DVDT_7pin 7 | Connected to: Signal 80% · not connected 20% |
|
| GND_8pin 8 | Connected to: GND 100% | — |
| ILM_9pin 9 | Connected to: Signal 100% |
|
| ITIMER_10pin 10 | Connected to: Signal 70% · not connected 30% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Parsnip by LimesKey, StratosCore by pantojinho, Keel by BisocMOrg and Make Music by John-ODell.
The TPS259474LRPWR in open source designs
The gallery holds 11 open source boards using the TPS259474LRPWR from 10 GitHub repositories; a typical one measures about 106 × 96 mm and carries around 175 components.
73% use four copper layers or more, and 36% carry an open source license.
The most starred is Parsnip by LimesKey.
Parts used alongside the TPS259474LRPWR
Microcontrollers on boards using the TPS259474LRPWR
What boards using the TPS259474LRPWR are built for
TPS259474LRPWR: common questions
Where can I find a TPS259474LRPWR reference design?
Each of the 11 boards on this page is a real design using the TPS259474LRPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS259474LRPWR OVLO_2 pin?
The OVLO_2 pin has a resistor to GND on 10 of 10 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 10 open source designs using the TPS259474LRPWR.
What resistor goes on the TPS259474LRPWR ILM_9 pin?
The ILM_9 pin has a resistor to GND on 10 of 10 designs, most often 6.65 kΩ (then 1.69 kΩ). Counted from the KiCad layouts of 10 open source designs using the TPS259474LRPWR.
What resistor goes on the TPS259474LRPWR EN/UVLO_1 pin?
The EN/UVLO_1 pin has a resistor to GND on 7 of 10 designs, most often 100 kΩ (then 332 kΩ). Counted from the KiCad layouts of 10 open source designs using the TPS259474LRPWR.
What parts are used alongside the TPS259474LRPWR?
The BQ25798RQMR, ESP32-S3-WROOM-1-N16R8, MAX-M10S-00B, TPS2553DBVR-1 and TPS259474ARPWR appear in the most repositories here.
Which microcontrollers do boards using the TPS259474LRPWR use?
Most are built on ESP32 (5), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the TPS259474LRPWR?
The median is 106 × 96 mm, and 27% are two-layer designs.
What is the most popular open source board using the TPS259474LRPWR?
By GitHub stars, Parsnip by LimesKey, with 4 stars.
Can I simulate one of these boards using the TPS259474LRPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.