5 open source boards using the W65C51N
Real designs built with the W65C51N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
6502-wozmon
tsanders30004
183.7 × 131.3 mm38 parts2LNo license15ByteCradle 6502 MINI BOARD
ifilot
132.1 × 132.1 mm49 parts4LGPL-3.056502 board
ulmer-a
100 × 100 mm48 parts2LGPL-3.04-816-board
snippyrow
182 × 138.8 mm137 parts2LMIT0AVR/Arduino
6502puter
frankbartunek
208.5 × 78.7 mm32 parts2LNo license0
How designs wire the W65C51N
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the W65C51N connects to, and the resistors, capacitors and other passives placed on it.
- The XTAL1 pin has a crystal on 5 of 5 designs, most often 1.8432 MHz.
- The XTAL2 pin has a crystal on 5 of 5 designs, most often 1.8432 MHz.
- The RTS pin is left unconnected on 5 of 5 designs.
- The XTAL1 pin has a series resistor on 4 of 5 designs, most often 1 MΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1 | Connected to: GND 100% | — |
| RXCpin 5 | Connected to: Not connected 80% · a signal 20% | — |
| XTAL1pin 6 | Connected to: Signal 100% |
|
| XTAL2pin 7 | Connected to: Signal 100% |
|
| RTSpin 8 | Connected to: Not connected 100% | — |
| CTSpin 9 | Connected to: Not connected 60% · GND 40% | — |
| DTRpin 11 | Connected to: Not connected 80% · a signal 20% | — |
| VCCpin 15 | Connected to: 5V 100% | — |
| DCDpin 16 | Connected to: Not connected 60% · GND 40% | — |
| DSRpin 17 | Connected to: Not connected 60% · GND 40% | — |
| IRQpin 26 | Connected to: A connector 40% · not connected 20% |
|
| Φ2pin 27 | Connected to: W65C02 60% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 6502-wozmon by tsanders30004, ByteCradle 6502 MINI BOARD by ifilot, 6502 board by ulmer-a and 6502puter by frankbartunek.
The W65C51N in open source designs
The gallery holds 5 open source boards using the W65C51N from 5 GitHub repositories; a typical one measures about 182 × 131.3 mm and carries around 48 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is 6502-wozmon by tsanders30004.
Microcontrollers on boards using the W65C51N
What boards using the W65C51N are built for
W65C51N: common questions
Where can I find a W65C51N reference design?
Each of the 5 boards on this page is a real design using the W65C51N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the W65C51N XTAL1 pin connected?
The XTAL1 pin has a crystal on 5 of 5 designs, most often 1.8432 MHz. Counted from the KiCad layouts of 5 open source designs using the W65C51N.
How is the W65C51N XTAL2 pin connected?
The XTAL2 pin has a crystal on 5 of 5 designs, most often 1.8432 MHz. Counted from the KiCad layouts of 5 open source designs using the W65C51N.
How is the W65C51N RTS pin connected?
The RTS pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the W65C51N.
What parts are used alongside the W65C51N?
The 74HC14, MAX232, W65C02, 28C256 and 74LS32 appear in the most repositories here.
Which microcontrollers do boards using the W65C51N use?
Most are built on AVR/Arduino (1).
How big is a typical board using the W65C51N?
The median is 182 × 131.3 mm, and 80% are two-layer designs.
What is the most popular open source board using the W65C51N?
By GitHub stars, 6502-wozmon by tsanders30004, with 15 stars.
Can I simulate one of these boards using the W65C51N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.