16 open source boards using the DS1813

Real designs built with the DS1813, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the DS1813

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the DS1813 connects to, and the resistors, capacitors and other passives placed on it.

VCCpin 2Connected to: VCC 93%
GNDpin 3Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Playground 68030 Mk I by thorpej, MOUSE by mkeller0815, Cbm micropet by fachat and ByteCradle 6502 MINI BOARD by ifilot.

The DS1813 in open source designs

The gallery holds 16 open source boards using the DS1813 from 14 GitHub repositories; a typical one measures about 113.7 × 100 mm and carries around 48 components.

56% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.

The most starred is Playground 68030 Mk I by thorpej.

Microcontrollers on boards using the DS1813

What boards using the DS1813 are built for

DS1813: common questions

Where can I find a DS1813 reference design?

Each of the 16 boards on this page is a real design using the DS1813. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the DS1813?

The 28C256, AS6C4008-55PCN, W65C02SxP, 74HC00 and 74HCT02 appear in the most repositories here.

Which microcontrollers do boards using the DS1813 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the DS1813?

The median is 113.7 × 100 mm, and 56% are two-layer designs.

What is the most popular open source board using the DS1813?

By GitHub stars, Playground 68030 Mk I by thorpej, with 15 stars.

Can I simulate one of these boards using the DS1813 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part