2 open source boards using the XC6SLX-FTG256

Real designs built with the XC6SLX-FTG256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The XC6SLX-FTG256 in open source designs

The gallery holds 2 open source boards using the XC6SLX-FTG256 from 2 GitHub repositories; a typical one measures about 90 × 80 mm and carries around 356 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Glider by Modos-Labs.

Microcontrollers on boards using the XC6SLX-FTG256

What boards using the XC6SLX-FTG256 are built for

XC6SLX-FTG256: common questions

Where can I find a XC6SLX-FTG256 reference design?

Each of the 2 boards on this page is a real design using the XC6SLX-FTG256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the XC6SLX-FTG256?

The ADV7611, CBTL02043A, FUSB302BMPX, INA3221 and JW3651QFNE appear in the most repositories here.

Which microcontrollers do boards using the XC6SLX-FTG256 use?

Most are built on STM32 (2).

How big is a typical board using the XC6SLX-FTG256?

The median is 90 × 80 mm, and 0% are two-layer designs.

What is the most popular open source board using the XC6SLX-FTG256?

By GitHub stars, Glider by Modos-Labs, with 2,676 stars.

Can I simulate one of these boards using the XC6SLX-FTG256 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part