10 open source boards using the YM3812

Real designs built with the YM3812, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the YM3812

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the YM3812 connects to, and the resistors, capacitors and other passives placed on it.

VCCpin 1Connected to: VCC 100%
  • Decoupling capacitor on 30% · 100 nF (3)
IRQpin 2Connected to: 74LS04 20%, a connector 20% · not connected 40%
  • Pull-up to VCC on 30% · 2.2 kΩ (1), 8.2 kΩ (1), 4.7 kΩ (1)
NCpin 8, 9, 19, 22Connected to: Not connected 100%
GNDpin 12Connected to: GND 100%

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, Av board by rjw57, Isa opl2 by skiselev and AdLib by monotech.

The YM3812 in open source designs

The gallery holds 10 open source boards using the YM3812 from 10 GitHub repositories; a typical one measures about 103.9 × 99.4 mm and carries around 52 components.

67% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Snark barker by schlae.

What boards using the YM3812 are built for

YM3812: common questions

Where can I find a YM3812 reference design?

Each of the 10 boards on this page is a real design using the YM3812. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the YM3812?

The 74LS138, 74LS245, 74LS74, LM324 and YM3014B appear in the most repositories here.

How big is a typical board using the YM3812?

The median is 103.9 × 99.4 mm, and 67% are two-layer designs.

What is the most popular open source board using the YM3812?

By GitHub stars, Snark barker by schlae, with 687 stars.

Can I simulate one of these boards using the YM3812 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part