9 open source boards using the TXS0104EPWR
Real designs built with the TXS0104EPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Soldered Inkplate 4 TEMPERA with glass panel
SolderedElectronics
72 × 78 mm246 parts4LTAPR-OHL-1.05
ESP32Soldered Inkplate 6PLUS
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.02
ESP32Soldered Inkplate 6 FLICK
150.4 × 107.8 mm329 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 6PLUS
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 4 TEMPERA with glass panel panel
1.9 × 12 mm246 parts4LTAPR-OHL-1.05
ESP32Inkplate 6PLUS panel
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.02
ESP32Soldered Inkplate 6 FLICK panel
33.7 × 6.2 mm329 parts2LTAPR-OHL-1.01
ESP32Inkplate 6PLUS panel
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 6FLICK Gen2
144.4 × 107.8 mm247 parts2LTAPR-OHL-1.01
The TXS0104EPWR in open source designs
The gallery holds 9 open source boards using the TXS0104EPWR from 4 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 246 components.
78% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics.
Parts used alongside the TXS0104EPWR
Microcontrollers on boards using the TXS0104EPWR
What boards using the TXS0104EPWR are built for
TXS0104EPWR: common questions
Where can I find a TXS0104EPWR reference design?
Each of the 9 boards on this page is a real design using the TXS0104EPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TXS0104EPWR?
The AP5726WG-7, CH340C, ESP32-WROVER, MC14093BDTR2G and MCP47A1 appear in the most repositories here.
Which microcontrollers do boards using the TXS0104EPWR use?
Most are built on ESP32 (9).
How big is a typical board using the TXS0104EPWR?
The median is 144.4 × 107.8 mm, and 78% are two-layer designs.
What is the most popular open source board using the TXS0104EPWR?
By GitHub stars, Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics, with 5 stars.
Can I simulate one of these boards using the TXS0104EPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.